623973
59
Zoom out
Zoom in
Previous page
1/71
Next page
Ultimate PVR with HD Digital Jukebox
59
7.3.7 Wireless Network
[ Connect USB wireless module ]
Connect the USB module into enclosed cradle after connecting the AP Router to a PC.
You should not connect the USB module to TViX without the cradle. If you connect it by force, the TViX
can be damaged. if you have TViX PVR 2200 series, you must use enclosed USB host cable.
Please refer to the TViX homepage(www.TViX.co.kr) for a list of compatible wireless devices.
[ Configure Wireless Network ]
After booting, press SETUP-NETWORK- “Wi-Fi IP setting” and select DHCP or static IP.
After selecting DHCP, press “Search Wi-Fi Network” for searching your AP or AP router.
After the interval of searching, you can see following popup menu. Select the AP you want to get connect
with
A red colored icon means the AP uses WEP (Wired Equivalent
Privacy) and a blue colored icon means a non-WEP AP.
Currently supported WEP (Wired Equivalent Privacy) settings are the
OPEN System and
WPA(Wi-Fi Protected Access).
WEP key input :
WEP 64-Bit/ WEP 128 key and ASCII and HEXA
key.
Old firmware is not supporting the HEXA key.
WPA key input : ASCII only.
RADIUS (Remote Authentication Dial-In User Services) servers are
not supported.
You have to configure the WEP setting of the AP using the
AP’s instruction in advance.
Insert the network key using the remote’s numeric keys. As you
press the MENU button, the input mode for the remote will be cycle
from lowercase alphabet to uppercase alphabet to numeric input
mode.
To delete a character, press the Capture/Delete button.
If you insert exact network key, you could see well-formed TViX
Wi-Fi Network Info like following. network key is Hexa or ASCII.
If the network key is wrong or the AP doesn’t work with DHCP
setting, you would see some missing fields in TViX Wi-Fi Network
Info POP UP. Those fields which you might always see are SSID and
MAC
If you still have the problem after filling up correct key, please
recheck your setting of AP or reconnect the USB port.
Network disk setting : This setting is same as the wired network
setting. To configure the network disk, refer to TViX FAQ or NetShare manual
Caution
If you connect to a secured AP, the network performance will be 10% lower than an unsecured
AP.
In wireless connectivity connecting the Wireless USB to TVIX Device. The TVIX needs to be
powered off initially and then Powered ON .Then on the Network setting Menu WIFI IP setting will be
enabled
For better Wi-Fi signals adjust the position of AP and USB module
If you play high definition files over Wi-Fi, you will see stuttering. Also, depending on the
environment, you may experience stuttering when you play DVD files.
If you use a USB Wi-Fi adapter with another USB device, it may not work properly.
* If you want to change AP, you have to search the wireless network as in Step 2.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TViX PVR R-3310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TViX PVR R-3310 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info