22
3.5 HDD Installation/Exchange
Warning: If you change the HDD of a TViX equipped with an HDD, the warranty will be voided.
1. Assembling the TViX HD is very easy. Just follow
the instructions below:
Use a driver and screw the hard disk on to the
guide board.
Set the jumper to ‘Single Master’.
TViX M-4000SA model is supporting the SATA
hard disk and M-4000PA model is supporting
the PATA(General IDE) hard disk.
< Jumper Settings for TViX M-4000PA only >
The ‘Jumper Setting’ differs according to the HDD manufacturers, so please refer to the instructions
of the specific HDD provided by the HDD manufacturers.
2. Open the lid of the TViX by sliding the lid like pictures.
3. Set the jumper to Master and connect power cable and DATA cable
SAMSUNG Seagate IBM Western Digital
TViX M-4000