557310
52
Zoom out
Zoom in
Previous page
1/69
Next page
52
RESET PROCEDURE
While the Surface Sequence is scrolling, press/release the button
(< 2 seconds) to access the Log Mode displaying the first screen of
the most recent dive (Dive Preview/Identifier).
Press/release the button again (< 2 seconds) to access the second
Log screen (Dive Data) of the most recent dive.
Depress/hold the button while the second Log screen of the most
recent dive is being displayed to access the Reset screen. The
graphics CLR and id will appear with the Key Code 0000, the first 2
digits flashing (Fig. 60). Release the button.
If necessary to change the first 2 digits, press/release the button
repeatedly (< 2 seconds each time) to select the correct number.
Depress the button for 2 seconds to save the first 2 digit number and
advance to the sec
ond 2 digits, flashing.
If necessary to change the second 2 digits, press/release the button
repeatedly (< 2 seconds each time) to select the correct number.
Once the proper Key Code has been entered, depress the button for
2 seconds to accept the Key Code, complete the Reset operation, and
turn the unit Off (i.e., Clearing it).
If an incorrect Key Code number has been entered, the unit will revert
to the Surface Sequence when the button is depressed, resuming
previous operation(s).
Fig. 60 - RESET (Clear)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tusa Element SCA281 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tusa Element SCA281 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info