Manual Tusa Element SCA281 (page 35 of 69) (English)

557310

Zoom out

Zoom in

1/69

Upon ascending to within10 FT (3 M) below the Stop Depth, the

Deep Stop Main screen (Fig. 32) will automatically appear

displaying the Stop Depth (1/2 Max Depth) with the 2 minute

Countdown Timer that counts down from 02:00 to 0:00

(min:sec). Also displayed will be Dive Time Remaining, current

Depth and applicable bar graphs.

Press and release the button (< 2 seconds) to access the ALT 1

screen that displays Elapsed Dive Time (Fig. 33), press it again

to view the ALT 2 screen displaying Temperature, Time, and

Max Depth (similar to figure 29), then if a Nitrox dive press it

again to view ALT 3 displaying FO2 and PO2 (similar to figure

30).

> If you descend 10 FT (3 M) below, or ascend 10 FT (3 M)

above, the calculated Stop Depth for 10 seconds during the

countdown, the No Deco Main will replace the DS Main

display and the DS feature will be disabled for the

remainder of that dive.

> In the event that you enter Deco, exceed 190 FT (57 M), or

a High O2 condition (=> 80%) occurs, the DS will be

disabled for the remainder of that dive.

> The DS is disabled during a High PO2 Alarm condition

(when => Set Point).

Fig. 32 - DEEP STOP MAIN

Fig. 33 - DEEP STOP ALT 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tusa Element SCA281 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tusa Element SCA281 Manual

Product: