Manual Tusa Element II SCA282 (page 26 of 116) (English)

557319

Zoom out

Zoom in

1/116

• If FO2 for Gas 1 is set for 21%, it will remain set for 21% for that series of dives until

set for a higher numerical value.

• If the FO2 50% Default is set Off, FO2 for Gas 2 will remain at it's Set Point

previously selected until it is changed. If the FO2 50% Default is set On, FO2 for

Gas 2 will Default to 50% after the dive.

• The Element II is programmed to prevent FO2 for Gas 2 from being set at values

lower than the FO2 Set Point for Gas 1. Gas 2 can only be set to values equal to or

higher than the FO2 Set Points of Gas 1.

• When setting FO2 for Gas 2, the lowest value available will be the FO2 Set Point of

Gas 1. If FO2 Gas 1 is set for 32%, FO2 Gas 2 can only be set at values from 32 to

100%.

• FREE Dive Mode nitrogen calculations are only based on AIR and not affected by

these FO2 Settings.

SET F GROUP (FO2)

Set F >> FO2 Gas 1 >> FO2 Gas 2 >> FO2 50% Default.

> Depressing the A and S buttons simultaneously for 2

seconds while the NORM (or GAUG) Surface Main screen

is displayed will access the Set F screen (Fig. 14).

> Pressing and releasing the A button momentarily (< 2 sec)

while SET F is displayed will access Set FO2 Gas 1.

Fig. 14 - SET F (FO2)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tusa Element II SCA282 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tusa Element II SCA282 Manual

Product: