The XP500 incorporates Bluetooth technology that lets you communicate with Xbox LIVE
™
and PSN
™
chat, answer calls on your mobile
phone and listen to stereo music streaming from a Bluetooth enabled digital music player. So, for example, you can answer a phone call
or listen to your favorite songs while gaming. If you’re not using any of these Bluetooth features, you should turn off the Bluetooth radio
to conserve battery power.
Pairing the Bluetooth for Xbox LIVE or PSN Chat
See "Xbox 360 Chat Setup" on page 14.
See "PS3
™
Bluetooth Chat Setup" on page 16.
Pairing a Bluetooth Enabled Device (mobile phone, digital music player)
The XP500 Bluetooth must be powered off before you start:
1. On the XP500, press and hold the BT MFB for 5 seconds until the flashing LED changes from blue to
red—then release the button. A voice prompt in the earpiece will indicate that the XP500 is in pairing mode.
2. On your Bluetooth enabled device, activate the Bluetooth mode and search for Bluetooth devices as described in its user manual.
3. When your device is finished scanning, select “TURTLE BEACH XP500” from the list and follow the prompts to connect.
4. Enter “0000” as the Pass Key and select “OK”. A voice prompt in the earpiece will indicate that the XP500 is now paired with your device.
Dual Pairing
The XP500 can be simultaneously paired to 2 Bluetooth enabled devices at once. For example, you can pair the XP500 to Xbox LIVE chat
and your mobile phone at the same time. If your mobile phone is also a digital music player like many smart phones, you can stream music
to your headset as well. The XP500 will automatically remember the last 2 paired devices upon powering on.
NOTE: Only one Bluetooth device can be active on the headset at a time. For example, if you are making a call with the headset while on Xbox LIVE chat, the
chat will be deactivated until the call is over.
Making Calls
Once the XP500 is successfully paired with your mobile phone, you can use it to make and receive calls. The XP500 can be used with voice
dialing if your phone supports this function.
1. Using voice dialing* – Press and hold the BT MFB button for 3 seconds until you hear a tone—then release. The voice recognition
prompt in your phone will now be activated. Say the name of the phone number or person whom you want to call. You can exit the voice
recognition state at any time by pressing the MFB for 3 seconds.
2. Using mobile phone keys to make a call – Dial the number on the mobile phone as normal. Once the call has been placed, the sound will
automatically be transmitted to the XP500.
3. Redial – Double-click BT MFB button. You will hear two tones, and the last number called will be dialed.
4. Muting the microphone – During a call, the XP500 microphone muting can be toggled by Pressing the MIC MUTE button. You will hear
one tone, indicating that the mic mute is active. While the mic is muted, a beep will be heard every 30 seconds to let you know that mic
mute is still activated.
NOTE: Some mobile phones may not have a redial or voice recognition function. If a phone does not have a redial function, then a double-click of the
MFB will initiate the voice recognition state instead. If a phone does not have either function, then a double-click or 3-second press of the MFB will
have no effect.
Receiving Calls
When the XP500 Bluetooth is powered on and there is an incoming call you will hear a musical chime.
You have three options when an incoming call is received:
1. Answer call – Press the BT MFB once to accept the call. Press it again to end a call. A tone is heard in the earpiece each time you
answer or end a call.
2. Reject call – Press and hold the BT MFB for 3 seconds until you hear a beep. The call is sent directly to your voicemail.
3. Do nothing – The “incoming call chime” will sound until your phone sends the caller to voicemail.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Turtle Beach Earforce XP500 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Turtle Beach Earforce XP500 in the language / languages: English as an attachment in your email.
The manual is 4,54 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
