The XP500 incorporates intuitive voice prompts that announce critical headset status. Press the preset button and you'll hear the number.
When the batteries need to be replaced, it tells you in advance. When powering on or off, you’ll hear an announcement.
Engineered for High-Quality Sound
The XP500 headset is designed to deliver high-quality audio that makes it ideal for gaming, movies and digital music playback.
The high-fidelity, 50mm speakers are encased in acoustically-tuned ear cups with soft fabric cushions and deliver extended bass
with extraordinary dynamic range for optimum audio performance.
About the Ear Force XP500
34
3
45
6
1
2
1. Main Power Button with LED
Powering ON: Press and hold until the headset announces “Powering On”.
Powering OFF: Press and hold until the headset announces “Powering Off”.
Automatic Power OFF: If the headset doesn’t detect any audio for more than 5 minutes, it will automatically shut down to conserve
battery power.
Wireless/Wired Mode: Press the Power Button twice quickly to switch between wireless and wired modes. The headset will announce
the selected mode. (See "Presets" on pg. 21 for further details)
Power Button LED Indicator: Flashes once per second when paired to the Transmitter and flashes twice per second when not paired.
(See “Pairing the Headset and Transmitter” on pg. 11 for further details)
Pairing Mode: Initiates pairing mode between the headset and transmitter. From a powered down state, press and hold the power
button for 6 seconds. The LED will begin to flash rapidly.
2. Removable Microphone with Adjustable Boom
The microphone can be removed from the headset when chat is not required by detaching it from the boom. (See "Setup" on pg. 13 for
further details)
3. Game Volume Control
Turn to adjust game volume level.
4. Presets Button
Press to select one of eight (8) alternate game audio presets. (See "Presets" on pg. 21 for further details)
5. Xbox 360 Controller Jack (for optional wired chat setup)
Insert the straight connector on the Xbox 360 Talkback Cable (sold separately) into this jack when using the XP500 with an Xbox 360 for
wired chat.
6. USB Input
Allows for headset programming by connecting to a USB port on a PC with the included USB cable. (See the “Presets” on pg. 21 for
further details)
XP500 Headset - Left Ear Cup Controls
56
1213
7
8
9
10
11
Be sure to
insert batteries
as shown.
7. Main (Main Preset Button)
Press to toggle between the selected (alternate) preset and the main (default) preset. (See "Presets" on pg. 21 for further details)
8. Mic Mute Button
Press to toggle between muting and unmuting the microphone. A high tone will sound when the mic is unmuted and a low tone will
sound when the mic is muted. When using the XBA Bluetooth Adapter, the mic can also be muted by pressing the button on the puck.
When using the optional Talkback cable, the mic can be muted directly from the switch on the Talkback cable or by pressing the mic
mute button on the headset.
9. Bluetooth LED Indicator
Indicates when Bluetooth is active or in pairing mode. (see the “Bluetooth” section on pg. 23 for further details)
10. Bluetooth Multi-function Button
Powers on the Bluetooth and performs several other functions described in the “Bluetooth” section (pg. 23)
NOTE: The Bluetooth feature is normally powered off to conserve battery power and may need to be powered on when first using the headset.
11. Bluetooth Volume Control
Press (+) or (–) to adjust Bluetooth volume level. A tone will sound each time the volume level changes.
12. Swivel Ear Cups
The ear cups may be turned 90 degrees to rest conveniently around your neck.
13. Battery Compartment Cover
Slide down to access the battery compartment. The headset is powered by (2) AA batteries (included) which should provide up to 15
hours of use depending on headset settings (Bluetooth, game audio, etc). Rechargeable NiMH batteries may also be used. The head-
set will announce when battery power is low.
XP500 Headset - Right Ear Cup Controls
78
Front ViewRear View
1
2
3
4
5
7
8
9
10
11
12
6
1.Power/Pairing LED Indicator
A solid LED indicates the transmitter is powered on and communicating with the headset. A pulsing LED indicates the transmitter can’t
communicate with the headset because it is powered off, not paired, or out of range. If this occurs, please refer to “Pairing the XP500
Headset and Transmitter” on page 11.
2.Digital Input LED Indicator
A solid LED indicates when a digital input signal is detected.
3. Dolby ProLogic
®
IIx LED Indicator
A solid LED indicates whenever a digital or analog input signal is being processed by the Dolby Pro Logic IIx decoder. This LED will turn
off when the “Dolby Bypass” is ON.
4. Dolby Digital Surround Sound LED Indicator
A solid LED indicates whenever a digital input signal is being processed by the Dolby Digital surround sound decoder. This LED will turn
off when the “Dolby Bypass” is ON.
5.Dolby Bypass Button and LED Indicator
Press to turn OFF Dolby processing. This allows you to hear the unmodified input signal in stereo. A solid LED indicates when
the Dolby Bypass is active and Dolby processing is disabled.
NOTE: Some presets on the XP500 headset may turn on the “Dolby Bypass” button automatically if the selected preset doesn’t utilize Dolby Headphone processing.
6.Wired Headphone Volume Control and Output Jack
This may be used for a second headset. Insert a wired headset into this jack to hear the same Dolby 7.1 Surround Sound signal
as the wireless headset.* The volume control does not affect the wireless headset.
7. Digital Input
Provides digital audio input from the Xbox 360 or PS3 via the included digital optical cable.
8.Digital Output
Provides digital audio output via an additional digital optical cable (not included) to connect the XP500 transmitter to your TV/home
theater. This allows you to hear your Xbox 360 or PS3 audio on the headset and TV/home theater speakers at the same time.
9. Line In (stereo analog inputs)
Use these inputs to connect analog audio sources (TV, MP3 player, etc). If the “Dolby Bypass” is OFF, the analog stereo signal will be
processed by the Dolby Prologic IIx decoder, producing an expanded stereo effect.
10.Line In Volume Control
Sets the volume of the analog inputs. This control has no effect on the digital signal level. Typically, this should be set to maximum
and the headset volume used to adjust the listening level. If the sound distorts, turn down the Line In Volume to prevent overloading
the analog inputs.
11.Power Socket
Insert the included USB power cable into this socket. Insert the other end into a free USB port on your console.
12.Power Switch
Press to turn the transmitter on or off.
* Since presets are governed by the XP500 headset, the presets do not apply to a second wired headset.
XP500 Transmitter
910
Transmitter Range
The transmitter sends game audio from your Xbox 360
®
or PS3
™
to the headset via digital radio frequency (RF) signal, so a direct line of
sight is not required. When you’re out of range, you may hear popping or clicking sounds if the headset loses the RF signal. For best perfor-
mance, place the transmitter in an open area that is unobstructed by objects that might absorb RF signals from the internal antenna.
Avoid placing it on a metal surface, such as the top of a home theater A/V receiver.
When the transmitter and headset are communicating, the top LED on the front of the transmitter will be on. If this LED is slowly pulsing,
it means the transmitter can’t communicate with the headset. This could happen if the headset is turned off, out of range or needs
to be “paired”.
Using Wired Headphones
The transmitter can only communicate with one wireless headset, so two wireless headsets cannot be used with the same transmitter.
The headphone jack on the front of the transmitter can be used to connect a set of wired headphones for listening to the Dolby Surround
Sound game sound being transmitted to the wireless headset.* The volume control above the jack sets the volume of the wired headset
and does not affect the volume of the wireless headset.
* Since presets are governed by the XP500 headset, the presets do not apply to a second wired headset.
Optimum range: within 20 ft.
Using the Transmitter
1112
The headset and transmitter in this package are “paired”, which means they’re synchronized to ensure they work together. When the
headset and transmitter are communicating, the top LED on the front panel of the transmitter will be on solid. If this LED is instead slowly
pulsing, it means the transmitter can’t communicate with the headset. This could happen if the headset is turned off or out of range. If the
LED is slowly pulsing when the headset is on and within range, then they might need to be “paired” as described below:
1
2
3
Step 1:
Make sure the headset is off by pressing the “Power”
button until the LED turns solid, and then release it when
the LED turns off.
Step 2:
Then press and hold the headset power button until the
LED turns solid and release when the LED begins to flash
rapidly. A voice prompt will announce "pairing headset."
Step 3:
Press and hold the transmitter “Bypass” button for 5
seconds until the topmost LED on the transmitter turns off,
then release the button. The transmitter LED will then flash
rapidly and a voice prompt will announce "headest paired."
After a few seconds, the topmost transmitter LED should be on solid and the headset LED should be flashing about once per second,
indicating that the units are paired.
Interference from Two Headsets
Only one headset can be paired with the transmitter. If you pair two headsets with the same transmitter, they’ll interfere with each other as
they compete for the transmitter RF signal. This will cause one headset to shut off. So don’t try to pair two headsets with the same transmitter!
1. Connect the Digital Optical Cable
NOTE: Remove the protective caps from each
end of the optical cable before inserting it
into the sockets.
2. Connect the Transmitter Power
1
2
Xbox 360
®
(Slim), PS3
TM
Xbox 360 (Original)*
1. Connect the Digital Optical Cable
(Requires Xbox 360 Audio Adapter, sold separately)
NOTE: Remove the protective caps from each end of the optical
cable before inserting it into the sockets.
2. Connect the Transmitter Power
1
2
* Xbox 360 HDMI Audio Adapter cable required (sold separately). If your HDTV
has an optical AUDIO OUT jack, you can use it to connect the optical cable
to the transmitter.
Pairing the XP500 and TransmitterSetup
1314
3
Right Ear Cup:
To remove the battery cover, slide downward.
NOTE: Be sure to insert batteries as shown.
4
5
Insert the boom so that the holes in the mic casing
and the marker on the jack are facing your mouth.
3. Insert the Headset Batteries.
4. Insert the Mic Boom.
5. Turn on the headset by pressing and
holding the power button until it turns
solid, then release.
6. Turn on the Transmitter by pressing
the power button.
6
1. Place the headset in “Wireless Chat Mode” by quickly pressing
the Power button twice. The headset will announce which mode
it’s in.
2. Power on the Xbox 360
controller and plug the XBA into the
controller headset jack.
3. With the XBA powered off, press and hold the button on the
XBA for 4 seconds to enter Bluetooth pairing mode. The LED will
begin to blink rapidly.
4. With the XP500 powered-on, press and hold the BT MFB
button on the right ear cup for about 5 seconds to power on the
Bluetooth.
Connecting the XBA Bluetooth Chat Adapter*
If this the first time you’ve powered-on the headset, the Bluetooth will automatically be in pairing mode.
If its not the first time the headset has been powered-on, make sure the Bluetooth is powered-off and press and hold the BT MFB
button for about 5 seconds until you hear “Pairing Bluetooth” in the headset.
After a few seconds, the XBA and the XP500 will be paired and the headset will announce “Bluetooth Paired”. The XBA will
automatically pair itself to the headset each time it’s powered on so you will only need to complete the pairing process during
initial setup.
* The XBA adapter is not compatible with the Xbox 360 chat pad and may not be compatible with third party controllers.
1. Place the XP500 in Wireless Chat Mode mode by quickly pressing the power
button twice.
2. In the PS3 Menu, select “Settings” > “Sound Settings” > “Audio Output Settings” >
Optical Digital > Dolby Digital 5.1
3. In the PS3 Menu, select “Settings” > “Accessory Settings” > “Audio Device Set-
tings” > set the “Input” and “Output” to “TURTLE BEACH XP500”
12/14 12:15 PM
0
Register to manage Bluetooth® devices such as
headsets, keyboards and mouse devices.
R
Re
Re
eg
eg
is
is
st
er
to
ste
ste
o
erto
er
o
to
m
mana
ma
an
a
a
age
n
a
n
ag
a
e
ge
g
e B
e B
e B
B
B
Bl
uet
o
Bl
u
Bl
ue
l
u
Bl
et
o
e
oot
h®
o
ooth
o
h
oth
h®
h®
®
®
®
®
®
®
® d
® d
®
d
dev
ic
dev
de
1. With the XP500 Bluetooth powered OFF, go in the PS3 Menu and
select “Settings” > “Accessory Settings” > “Manage Bluetooth
Devices”
2. If you have never used a Bluetooth device or have deleted any
profiles from other devices previously used with your console,
the PS3 prompt will ask if you wish to register a device. Choose
“Yes” to start scanning. If any other Bluetooth devices have
previously been paired with your console they will appear in a
list. Choose “Start Scanning” at the bottom of the screen.
3. On the XP500, press and hold the BT MFB for 5 seconds until the
flashing LED changes from blue to red— then release the button.
A voice prompt in the earpiece will indicate that the XP500 is in
pairing mode.
4. When the PS3 is finished scanning, it will prompt you to select
the Bluetooth device. Select “TURTLE BEACH XP500” from the list.
5. Enter “0000” as the Pass Key and select “OK”. A voice prompt
in the earpiece will indicate that the XP500 is now paired with
your PS3.
When using the XP500 with a PS3, the Bluetooth is used for PSN
™
chat. Follow these instructions to pair the Bluetooth.
Xbox 360
®
Wired Chat Setup* (optional)
Configure Xbox 360 Settings
PS3
TM
Chat Setup
Configure PS3 System Settings
1718
The XP500 uses Dolby Pro Logic IIx, Dolby Digital, and Dolby Headphone surround processing technologies – the industry-standard
formats for encoding multi-channel game audio. Dolby Headphone processing recreates multi-channel surround sound using the XP500
headset, as if you were listening with multiple speakers all around you.
The XP500 Transmitter supports three types of digital source material and analog stereo. When the Dolby Bypass button is ON, Dolby
processing is deactivated, so you can hear the unprocessed input signal in stereo. Here’s how the signal processing modes operate:
· When the digital input signal is active, the front panel Digital Input LED turns on and the analog inputs are turned off.
· If the Dolby Bypass LED is ON, Dolby processing is deactivated and the signal will be heard as stereo.
· If the digital input source is a Dolby Digital signal, the front
LED turns on and Dolby Headphone processes the channels to create
surround sound in the headset.
· If the digital input source is a Dolby Pro Logic IIx signal, both Dolby LEDs will turn on and Dolby Headphone processes creates
Pro Logic IIx surround sound in the headset.
· If the digital input source is stereo, the
LED turns ON and the signal is processed by Dolby and Dolby Headphone
to create and expanded stereo sound in the headset.
· If the digital input source is not active (or disconnected) the analog stereo signal will be active.
· If there is an analog stereo input and the Dolby Bypass LED is ON, there will be no Dolby processing and the signal will be heard as stereo.
· If the is an analog stereo input and the Dolby Bypass LED is OFF, the
LED turns ON and the analog stereo signal is processed
by Dolby Pro Logic IIx and Dolby Headphone to create an expanded stereo sound in the headset.
Setting up the transmitter as illustrated below lets you listen to your console or TV with the XP500 headset. You can also hear your console
on your home theater speakers without disconnecting the optical cable from the transmitter.
The XP500 transmitter’s analog inputs connected to the TV will automatically shut off whenever your console is active, as indicated by the
digital input LED on the transmitter front panel. When your console is turned off, the transmitter analog inputs will automatically turn on so
you can listen to the TV with the XP500 headset without having to disconnect cables.
Connecting the XP500 transmitter digital output to your home theater system will pass your console’s game audio from the transmitter’s
digital input to the home theater A/V receiver digital input, so you can hear the game audio on your XP500 headset and your surround
sound speakers at the same time. To hear the game audio only on the XP500 headset, turn down or mute your speakers.
Home Theater
Digital In
Transmitter
Digital Out
TV
Analog Output
Transmitter
Analog Input
Digital Optical Cable
(included)
USB Power Cable
(included)
Stereo RCA Cable
(sold separately)
Additional Digital Optical Cable
(sold separately)
Stereo Sound Field
Sound field with Dolby
Headphone
Surround Sound Processing
Home Theater SetupDolby
®
Processing
1920
The DSP provides a wide variety of audio enhancements, including:
Noise Gates: Separate noise gates on the game, chat and microphone audio channels cut out background noise that’s below a threshold
point, so rather than hearing static or other distracting sounds, you’ll hear total silence when there’s nothing going on.
Sonic Lens: The game sound can be processed by band-limited dynamic range compression that focuses on specific types of sounds
in the game (e.g. footsteps, the loading of a gun, etc.) so you can hear them better and react faster.
Sound Field Expander: The game sound field can be adjusted from narrow to wide, bringing out background sounds that might be difficult
to hear.
Ear Guard: After the game, chat and mic audio is mixed together, they’re processed by Ear Guard which limits the maximum sound level
before it reaches your ears, reducing ear fatigue during long gaming sessions.
Blast Limiter: The maximum sound level can be limited over a wide range, so you can turn up the volume of softer sounds without blasting
your ears when louder sounds occur.
Chat Boost: Automatically boosts the level of Xbox LIVE
™
or PSN
™
chat signals as the game volume increases, so you can always hear
your teammates regardless of game volume.
Voice Morphing: Change the pitch of your voice from the deep lows to shrill highs, disguising yourself to other online players.
Microphone ALC: An Automatic Level Control on the microphone channel helps prevent overload when you shout into the mic.
Microphone Monitoring: Hear your voice as you speak into the mic, so you won’t have to shout.
Multi-Band Equalizers: The game, chat and mic audio can be individually adjusted for optimum tone settings (e.g. bass boost/cut, treble
boost/cut, midrange boost/cut).
Intuitive Voice Prompts: A real voice announces headset status, such as “Low Battery”, “Preset #”, etc.
The XP500 headset incorporates a Digital Signal Processor (DSP) to independently modify game, chat and microphone audio. The DSP
settings are saved as presets, which are described in the next section. Connecting the XP500 headset to a PC with the included USB cable
lets you create custom presets or replace the presets with different ones downloaded from our website. For more information on custom
presets, please visit the “customize” section at www.TurtleBeach.com.
GAME SOUND
NOISE GATE
SONIC LENS
MULTI-BAND EQ
SOUND FIELD EXPANDER
BLAST LIMITER
NOISE GATE
CHAT BOOST
MULTI-BAND EQ
NOISE GATE
LEVEL CONTROL
VOICE MORPH
MULTI-BAND EQ
MIC MONITOR
CHAT SOUND
MIC SOUND
EAR
GUARD
Digital Signal Processing
2122
The XP500 has a total of 18 presets that are grouped in two sets of 9. The first set is optimized for wireless chat mode and the second
set of is optimized for wired chat mode. Pressing the power button twice quickly will switch between wireless and wired modes and the
headset announces which mode is active.
Main and Alternate Presets
The 9 presets are grouped as one (1) Main preset and eight (8) Alternate presets. The main preset is “flat”, meaning that it does not
process the sound, while the Alternate presets are optimized for specific game conditions. Each Alternate preset has different settings to
modify the game, chat and microphone sounds, so as you toggle through them you'll hear the sound change as it’s processed by the preset.
Connect the USB port on the left ear cup
to the USB port on your PC using the included
USB adapter cable
Using Presets
Pressing the Main button on the right ear cup toggles between the Main and Alternate presets. For best results, start with the Main preset
and then toggle to an Alternate preset that’s optimized for the game situation you're in. When the situation has passed, you can switch
back to the Main preset. For example, if you want to focus in on the sound of enemy footsteps, toggle to one of the Alternate presets that’s
optimized for footsteps, then toggle back to the Main preset when you’re done.
Customizing Presets
The 18 default presets can be replaced with custom presets by downloading new ones from www.TurtleBeach.com/customize. You can
also create your own custom presets by downloading the XP500 preset editing software from our website.
Advanced Customization
Want to know everything about preset customization and XP500 programmability? A comprehensive user guide is available for download
at www.TurtleBeach.com/customize
Presets
2324
The XP500 incorporates Bluetooth technology that lets you communicate with Xbox LIVE
™
and PSN
™
chat, answer calls on your mobile
phone and listen to stereo music streaming from a Bluetooth enabled digital music player. So, for example, you can answer a phone call
or listen to your favorite songs while gaming. If you’re not using any of these Bluetooth features, you should turn off the Bluetooth radio
to conserve battery power.
Pairing the Bluetooth for Xbox LIVE or PSN Chat
See "Xbox 360 Chat Setup" on page 14.
See "PS3
™
Bluetooth Chat Setup" on page 16.
Pairing a Bluetooth Enabled Device (mobile phone, digital music player)
The XP500 Bluetooth must be powered off before you start:
1. On the XP500, press and hold the BT MFB for 5 seconds until the flashing LED changes from blue to
red—then release the button. A voice prompt in the earpiece will indicate that the XP500 is in pairing mode.
2. On your Bluetooth enabled device, activate the Bluetooth mode and search for Bluetooth devices as described in its user manual.
3. When your device is finished scanning, select “TURTLE BEACH XP500” from the list and follow the prompts to connect.
4. Enter “0000” as the Pass Key and select “OK”. A voice prompt in the earpiece will indicate that the XP500 is now paired with your device.
Dual Pairing
The XP500 can be simultaneously paired to 2 Bluetooth enabled devices at once. For example, you can pair the XP500 to Xbox LIVE chat
and your mobile phone at the same time. If your mobile phone is also a digital music player like many smart phones, you can stream music
to your headset as well. The XP500 will automatically remember the last 2 paired devices upon powering on.
NOTE: Only one Bluetooth device can be active on the headset at a time. For example, if you are making a call with the headset while on Xbox LIVE chat, the
chat will be deactivated until the call is over.
Making Calls
Once the XP500 is successfully paired with your mobile phone, you can use it to make and receive calls. The XP500 can be used with voice
dialing if your phone supports this function.
1. Using voice dialing* – Press and hold the BT MFB button for 3 seconds until you hear a tone—then release. The voice recognition
prompt in your phone will now be activated. Say the name of the phone number or person whom you want to call. You can exit the voice
recognition state at any time by pressing the MFB for 3 seconds.
2. Using mobile phone keys to make a call – Dial the number on the mobile phone as normal. Once the call has been placed, the sound will
automatically be transmitted to the XP500.
3. Redial – Double-click BT MFB button. You will hear two tones, and the last number called will be dialed.
4. Muting the microphone – During a call, the XP500 microphone muting can be toggled by Pressing the MIC MUTE button. You will hear
one tone, indicating that the mic mute is active. While the mic is muted, a beep will be heard every 30 seconds to let you know that mic
mute is still activated.
NOTE: Some mobile phones may not have a redial or voice recognition function. If a phone does not have a redial function, then a double-click of the
MFB will initiate the voice recognition state instead. If a phone does not have either function, then a double-click or 3-second press of the MFB will
have no effect.
Receiving Calls
When the XP500 Bluetooth is powered on and there is an incoming call you will hear a musical chime.
You have three options when an incoming call is received:
1. Answer call – Press the BT MFB once to accept the call. Press it again to end a call. A tone is heard in the earpiece each time you
answer or end a call.
2. Reject call – Press and hold the BT MFB for 3 seconds until you hear a beep. The call is sent directly to your voicemail.
3. Do nothing – The “incoming call chime” will sound until your phone sends the caller to voicemail.
Bluetooth
2526
XP500 Transmitter Technical Specifications
· 50mm diameter speakers
· Game audio frequency response: 20Hz - 20kHz, >120dB SPL @ 1kHz
· Condenser microphone frequency response: 50Hz - 15kHz
· Game audio digital 2.4GHz RF wireless reception
· Bluetooth radio with dual-pairing mode and A2DP compatibility
· Headphone amplifier: Stereo 27mW/ch, THD <1%
· Digital Signal Processor for independently controlled chat, game and mic signals
· USB port for programming the DSP via a Windows XP/Vista/7 computer
· Operates on (2) AA batteries or (2) AA rechargeable NiMH batteries
· Automatic shut down after approx 5 minutes of carrier loss or silence to conserve battery power
· Battery booster circuit extends battery life for up to 15 hours
· Weight: 39 oz (1.1Kg)
· Digital 2.4GHz RF wireless transmission with up to 30 foot range
· Stereo headphone output with volume control for external wired headphones
· Frequency response: 20Hz - 20kHz
· Optical TOSLINK digital audio input compatible with 48kHz digital audio stream
· Optical TOSLINK digital audio output pass-through of digital input stream
· Stereo RCA inputs for processing digital music player, TV and other analog sources
· 150MIPS Digital Signal Processor for Dolby processing
· Maximum analog input level with volume control on maximum setting: 2Vpp (700mV rms)
Input sensitivity may be adjusted to accept higher level signals by lowering the volume control
· Dimensions: Height 8.875 in (22.5 cm), width 4.375 in (11.1 cm), depth 4.375 in (11.1cm)
Weight: 8.4 Oz (240g)
No sound
• Check that the transmitter and headset volume controls are both turned up.
• Check that the transmitter power and optical cables are properly connected.
• Check that the headset is powered on. The LED on the left ear cup should be ashing.
• Check if the top LED on the front of the transmitter is on solid. If the LED is slowly pulsing, it indicates that the transmitter isn’t
communicating with the headset. If the headset is on solid and the transmitter LED is slowly pulsing, then the headset and transmitter
need to be “paired” as described in the section “Pairing the XP500 Headset and Transmitter”.
Audio Drops, Popping or Clicking Sounds
Audio dropouts, popping or clicking sounds on the headset are caused by poor reception. This can occur when:
• The headset and transmitter are out of range. For best performance, stand within 20 feet from the transmitter.
• There’s a wall or other large object between the headset and transmitter.
• The transmitter is in a bad location that is interfering with the antenna.
• A wireless base station or wireless LAN are causing a lot of RF activity that’s blocking the RF signal from the transmitter.
Sound Too Low when using the Analog Inputs
If you’re listening to the analog inputs on the transmitter and the sound is too low, even with the headset volume turned up all the way,
turn up the volume on the transmitter or on the audio source. Note that the transmitter volume control has no affect on the digital input.
Audio Distortion when using the Analog Inputs
If the sound is distorted when using the transmitter analog input, it may be that the audio source is overloading the transmitter. Try turning
down the volume on the transmitter to reduce the input sensitivity, then turn up the headset volume to a comfortable level. Note that the
transmitter volume control has no effect on the digital input.
Analog Input isn’t working
The transmitter analog inputs will automatically shut off whenever the digital input is active. To hear the analog input signal, either disconnect
the optical cable from the digital input on the transmitter, or shut off the device connected to the optical cable (e.g. XBOX 360) to disable
the digital audio signal.
Properly Positioning the Headset
Don’t wear the headset with the headband behind your head. The headband must be positioned on top of your head to optimize the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Turtle Beach Earforce XP500 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Turtle Beach Earforce XP500 in the language / languages: English as an attachment in your email.
The manual is 4,54 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
