541079
7
Zoom out
Zoom in
Previous page
1/28
Next page
4
SURROUND
ANGLES
SURROUND
ON/ OFF
PAIR
Pairing the Headset and Transmitter
The headset and transmitter in this package are “paired”, which means they’re synchronized to ensure they work together. When the
headset and transmitter are communicating, the POWER LED on the front panel of the transmitter will be on solid. If this LED is instead
pulsing slowly, it means the transmitter can’t communicate with the headset. This could happen if the headset is turned off or out of
range. If the LED is pulsing slowly when the headset is on and within range, then they might need to be “paired”
as described below.
The headset and transmitter are paired out of the box, so the following instructions are necessary only if pairing appears to have been lost.
ON - - OFFBASS BOOST
POWER
EFFECTS
2 feet
Maintain a distance of at least
2 feet between the headset and
transmitter when pairing.
1. Make sure the headset and transmitter are turned off and
they are at least 2 feet away from each other.
2. Power on the transmitter by connecting it to a free USB
port on your gaming console. Then press and hold the
PAIR button on the transmitter for about 5 seconds.
Release the PAIR button when the transmitter’s Power/
Link LED begins to flash rapidly (twice per second). NOTE:
If you hold the transmitter’s PAIR button for too long (over
20 seconds), the light will blink extremely quickly, and you
will need to start over from step 1.
3. Press and hold the headset Power button for about 6
seconds until you hear the second double beep, then
release the Power button. At this point, the headset LED
will flash rapidly (twice per second).
4. Wait for the headset and transmitter to pair. This process
could take up to 30 seconds.
If pairing is successful, the Power/Link LED on the
transmitter should be on solid and the headset LED should
be flashing about once per second, indicating that the units
are paired.
If pairing fails, repeat steps 1-4. It may take up to 5 attempts
to pair successfully.
NOTE: Only one headset can be paired with the transmitter. If you pair two headsets with the same transmitter, they’ll interfere with
each other as they compete for the transmitter RF signal. This will cause one headset to shut off. So don’t try to pair two headsets
with the same transmitter!
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turtle Beach Earforce X42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turtle Beach Earforce X42 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Turtle Beach Earforce X42

Turtle Beach Earforce X42 Quick start guide - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info