541095
10
Zoom out
Zoom in
Previous page
1/15
Next page
15 16
Technical Specifications
DXL1 Headset
• 50mm diameter speakers
• Speaker Frequency Response: 20Hz - 20kHz, >120dB SPL @ 1kHz
• Condenser Microphone Frequency Response: 50Hz - 15kHz
• Cable length: 16 ft.
DXL1 Amplifier
• Stereo DC-coupled, 35mW/ch, THD <1%, Frequency Response: DC - 30kHz
• Fixed Bass Boost +9dB @150Hz• Mic mute switch
• Maximum analog input level with volume control on maximum setting: 2Vpp (700mV rms)
• 3.5mm plug for line input
• 2.5mm Xbox 360 talkback cable jack
• USB connector for power (5VDC @ <60 @ mA max)
DSS2 Surround Sound Processor
• Game audio frequency response: 20Hz - 20kHz, >120dB SPL @ 1kHz
• Headphone amplier: Stereo 35mW/ch, THD <1%
• Digital Audio Input: TOSLINK connector compatible with 48kHz Digital Audio Streams
• Maximum Analog Input: 2Vpp (700mV rms)
• USB connector for power (5VDC @ <380 @ mA max)
Troubleshooting
Xbox 360 Does Not Have Digital Output
Older Xbox 360 models don’t include an digital optical output. If this is the case with your Xbox 360, then you will have to purchase a cable that
includes a digital output jack on the connector. Here are the Xbox 360 cables that support digital output:
• Component A/V cable
• VGA A/V cable
• S-Video A/V cable
• Advanced SCART A/V cable
• HDMI audio adapter cable
• Composite A/V cable with digital output
If you are using HDMI and your Xbox A/V cable does not have a digital output, then you can alternatively connect the DSS2 digital optical cable
to a digital audio output on your HDTV (if your HDTV has a digital optical output).
No Audio When Using a BluRay Player
Ensure the audio settings in the BluRay player are congured to play Dolby Digital. The DSS2 is not DTS compatible. If the DSS2 is connected to
a digital source with a DTS signal, then the DSS2 will not receive audio.
No Sound When Using a Digital Connection
Ensure the digital cable is connected properly and receiving a signal. When connected to a console that is powered on, carefully check to see if
a red light is being emitted from the end of the digital optical cable. Also be sure that the protective covers have been removed from the ends of
the digital optical cable.
Analog Input isn’t Working
The DSS2 analog input will automatically shut off whenever the digital input is active. To hear the analog input signal, either
disconnect the optical cable from the digital input on the DSS2, shut off the device connected to the optical cable (e.g. Xbox 360) to disable the
digital audio signal, or connect to the auxiliary input.
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
GAME
CHAT
ON MIC MUTE
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turtle Beach Earforce DXL1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turtle Beach Earforce DXL1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info