Manual Turmix VX 250 (page 27 of 32) (English, German, French, Italian)

485325

Zoom out

Zoom in

1/32

Connect the mains cable to a grounded mains socket 10.

Press the on/off switch 11.

The green power on lamp and the yellow steam generator indicator lamp of

the generator will glow 12.

Turn the variable steam control knob to the middle 13.

Wait till the appliance is ready for operation (when it is ready, an audio signal

is sounded) 14.

Lift the iron and hold it in the air and press the steam trigger till steam starts

to come out. When the appliance is used for the first time, this takes up to 30

seconds 15.

As long as the yellow steam generator indicator lamp glows 12 (about 2

min.), the steam output quantity remains at a reduced level. When the indica-

tor lamp goes off, it automatically increases.

3.8 Switching On and Heating Up

Phase

11 12

13 14

During ironing, the yellow steam generation indicator lamp

and the red heating-up lamp of the iron go on and off regu-

larly: This indicates that the generator and iron are getting

heated. This is a normal feature.

The flow control knob can be used to adjust the quantity of steam continu-

ously depending on the material (also see the table on page 9).

Continuous variable steam output 16:

Adjust the flow control knob to suit the type of material being ironed, to the

desired position. The table on page 9 shows typical applications. The more

you rotate the knob clockwise"+", the greater does the quantity of steam

output become.

"E" = Eco-Mode 17 (only model VX 250):

This setting is recommended for quick ironing jobs that need less steam (for

example, when you want to straighten out a slightly creased blouse early in

the morning).

"Maxi"-Modus / Turbo steam 18 (only model VX 250):

In this position, lots of steam comes out of the base of the iron for a few

seconds (= "Turbo-steam"); thereafter, the steam output quantity is reduced

back to the normal level.

Wait for a few seconds before you repeat this turbo-effect, since otherwise,

water can come out of the base (the steam has to get heated up again first).

Press the steam trigger to get steam 19.

Here are a few valuable tips for using the appliance:

Owing to the high steam output, press the steam trigger only briefly

only once. Brief and repeated pressing of the steam trigger is enough to

continuously get an adequate quantity of steam (pressing it for too long can

result in water being ejected).

When use is intensive, steam can come out even after releasing the

steam trigger. Therefore, the residual steam can condense on the ironing rest

and water residue is left behind. This is normal. Sponge it off if necessary.

There is no risk of the metal being damaged.

Turn the flow control knob to the middle 17:

- the appliance is used for the first time,

- if the water tank is empty,

- every time the anti-scale cartridge is replaced.

3.9 Variable steam control knob

3.10 Generating steam/Steam trigger

Caution! If there is no more water in the tank do not press

the steam trigger any more!

3.7 Connecting

Caution! Electrical energy can be fatal! In an emer-

gency, immediately pull the plug from the socket. Never

allow live parts to come in contact with water!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Turmix VX 250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Turmix VX 250 Manual

Product: