CHARGE THE BATTERY
STEP1
Use only the supplied AC adapter as a charger for the battery. Hang the
assembled vacuum cleaner on the wall mounting, the battery is in the motor
unit.
STEP 2
Insert the charger plug into the device socket Insert the charger plug into an
electrical outlet. The top light of the battery indicator flashes during charging.
Charge the battery with the charger for 4 - 5 hours before using the vacuum
cleaner.
Warning: Always keep the battery and charger dry. For charging, the battery
must always be in the device, never removed.
STEP 3
As soon as four bars light up in the charging status display (9), the battery is
fully charged and the device can be put into operation.
ARENTION:
Do not leave the cyclone vacuum permanently connected to the charger! Pull
out the power plug from the socket and the plug from the device as soon as all
four bars light up. This saves energy and extends the life of your device. As
soon as the suction power drops, charge the device immediately.
IMPORTANT: PERIODIC CHARGING OF THE BATTERY
To prevent deep discharge, the battery must be charged every 3 months even
when not in use. Failure to follow this procedure will void the warranty on the
battery. Our technical service can determine whether a battery is deeply
discharged.