Manual Turbionaire Trend 120 (page 14 of 82) (English, German, French, Italian, Spanish)

804607

Zoom out

Zoom in

1/82

6. TROUBLESHOOTING

PROBLEMS CAUSES AND SOLUTIONS

The unit does not switch on. There is no power supply.

Check the main switch and/or electrical connections.

The impeller does not work. Check the device.

This device is equipped with a manual reset protection system that in the event of a mechanical

obstruction in the rotation will switch off the engine.

To restore normal operation, proceed as follows:

disconnect the device from the mains;

remove the cause of the mechanical obstruction (only qualified personnel);

reconnect the device to the mains.

The device will only resume normal operation if the protection system does not detect any additional

faults. If the fault persists, contact the client support service.

7. MAINTENANCE & SERVICE

Before carrying out any maintenance, ensure the device is

disconnected from the mains power supply.

1. Wipe down the device using wet soapy cloth only. Do not allow

water to come into contact with any electrical part, such as the

motor.

2. Never use petrol, benzene, thinner or any other such chemicals

for cleaning the ventilating fan.

3. Do not place hot objects near or install nearby hot appliances.

OONN

OFF

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Trend 120 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 25.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Turbionaire Trend 120 Manual

Product: