In standby mode, long press for 3 seconds to enter the cleaning function a
the air; this feature allows the unit to run at low speed for 5 minutes, after which it
automatically shuts down for 55 minutes. After 55 minutes the unit automatically turns on
again for 5 minutes and then turns off again for 55 minutes. "C" is displayed on the display
screen during low speed operation. After this function is turned on, it can only be turned off
by pressing the ON/ OFF key again for 1 second, without affecting other normal
operations on (the key flashes when entering the air cleaning function).
6.5 Air cleaning function
In standby mode, long press the button for 3 seconds to enter the
remote control synchronization mode, the indicator light keeps flashing.
In the pairing mode, press the button of the remote control and a
beep will be heard, the remote control has connected successfully. If no
operation is performed or synchronization fails after 15 seconds, the
system returns to standby.
6.6 Connecting the remote control
ON/OFF start/stop button - Used to start/stop the unit.
Speed increase button - For the "boost" setting, long press this
button, the fan will return to operation in the 3rd speed level after
working for 5 minutes in "boost" mode
Speed down button - To reduce speed.
LED lighting button - used to turn on/off the unit's LED lighting.
6.7 Use of the remote control
This function is available if the unit is in standby mode.
Motion sensors are activated by passing the hand from left to right or vice versa
right of the control panel.
1. Moving the hand from left to right increases the gear. From boost mode, the same
movement causes the return to minimum speed.
2. Passing the hand from right to left, function available only when the motor of the unit
is turned on, causes it to enter Quick Timer mode, after which after 5 minutes it
will stop From the Quick Timer mode, the same movement causes the unit to stop
immediately.
The gear set as a result of gesture control will be permanently displayed on
display. In Quick Timer mode, the gear will be displayed intermittently.
6.8 Gesture control
Gesture
sensor
Display
screen
Gesture
sensor
25
EN