804565

Turbionaire Thea 50 Manual

22
Zoom out
Zoom in
Previous page
1/116
Next page
5.2 Unit dimensions (mm)
Observe the safety distances from the unit (calculated in mm).
5.3 Safety distances
Keep this information in mind when mounting the unit.
After unpacking, check that the delivery is complete and that all parts are free of possible
transport damage.
1. - hood
2. - reducer 150 - 120 mm
3. - non-return valve
4. - remote control
5.1 Package Contents
5. INSTALLATION
ATTENTION!
This unit is designed to be installed and used in a furniture body.
See the pictures
1
See the picture
2a 2b 2c 2d
Check that the built-in furniture is positioned horizontally and that it has sufficient load-
bearing capacity.
Note: Follow the manufacturer's specifications regarding the load-bearing capacity of the
built-in furniture.
Make sure that the built-in furniture withstands temperatures up to 90 °C.
Make sure that the built-in furniture allows for embedding even after the cutting work is
done.
1.
2.
3.
4.
5.4 Checking the furniture
See the picture 3
EN
5.5 Installation steps
Note! Do not connect the power cable until the installation is complete!
Note! When the hood and the equipment powered by energy other than electric work
simultaneously, the negative pressure in the room must not exceed (4 x 10 Bar). Get a
second person to help you with the installation.
1.Cut the installation gap in the cabinet wall under which the hood will be mounted.
Use the dimensions in the image (calculated in mm) as a guide.
-5
2. Insert the hood into the furniture body.
Make sure that the elastic clips are fixed on the furniture body on both sides. See the
images
4a
4b
3. Adjust screws 1, 2, 3, 4 until the flanges of both sides are fixed in the furniture body. See
the pictures 4d
5.6 Fitting the grease filters
ATTENTION!
By falling, the grease filter can damage the cooking zone below. Hold the
filter firmly when installing it.
For the installation of the grease filter/filters, see the image
5.7 Exhaust size (mm)
See the picture
5
Position and secure the flap on the hood connection.
5.8 Installation of the non-return valve
7
4c
6
22
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turbionaire Thea 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Thea 50 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info