804594
5
Zoom out
Zoom in
Previous page
1/126
Next page
5
C. THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY
Any person working with a refrigerant or cooling circuit must hold a valid
certificate issued by an accredited assessment authority competent in the field to
authorize the safe handling of refrigerants according to the recognized assessment
specifications in the field.
Take into consideration the protection of the environment when removing the
packing of the unit and the unit itself at the end of its useful life.
The appliance must be stored in a well-ventilated area where the room size is in
line with the operating conditions.
The appliance must be stored in such a way that mechanical damage cannot occur.
Information for spaces where refrigerant pipes are allowed:
-the installation of the pipes must be kept to a minimum;
-the pipes must be protected from physical damage and, in the case of
flammable refrigerants, must be installed in a well-ventilated area;
-compliance with national gas regulations;
-mechanical connections must be accessible for maintenance;
-in the case of units containing flammable refrigerants, the minimum area of
the room must be mentioned under the form of a table or of a single figure without
reference to a formula;
Ventilation holes should be kept free.
Any service intervention will only be performed in accordance with the
manufacturer's recommendations;
The pipes connected to an appliance should not contain a potential source of fire;
When the portable air conditioner or the dehumidifier is turned on, the fan can
operate permanently under normal conditions to ensure a minimum air volume of 80
m3 / h, even when the compressor is closed due to the temperature controller.
Do not perforate or burn.
Use only the tools recommended by the manufacturer for defrosting or cleaning
Do not perforate any of the components of the refrigerant circuit. The cooling gas
may be odourless.
Carefully store the appliance to prevent mechanical damage.
Only the persons authorized by an accredited agency certifying their
competencies can handle refrigerants in accordance with the local legislation.
All repairs must be carried out in accordance with the manufacturer's
recommendations.
Maintenance and repairs requiring the assistance of qualified personnel must be
carried out under the supervision of specialists in the use of flammable refrigerants.
Do not perforate any of the components of the refrigerant circuit. The refrigerant
may be odourless.
Additional warnings for the unit using the R290 refrigerant (refer to technical data plate
for the type of refrigerant used).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turbionaire Smart 14eco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Smart 14eco in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 13.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info