Manual Turbionaire Smart 10 eco (page 17 of 126) (English, German, French, Italian, Spanish)

804591

Zoom out

Zoom in

1/126

B. Drainage

There are two ways of removal collected water produced by the unit.

1. Manual draining: the water tank is removed manually.

2. Continuous draining: attach a drain hose to the unit so that the condensed water is

drained by using gravity.

C. Emptying the water tank

The unit will shut down once the water tank is full. It will run again once you have emptied

the water tank and reinstalled it properly. When the tank is full, the unit will make a buzzing

sound, and the “Water Full” LED will turns in red

•Press the POWER button to turn off the unit.

•Pull on the water tank and slide out of the body of the dehumidifier.

•Empty the water into an area with a drain or outside.

•Clean the inside of the tank, if necessary, as well as the outside.

•Replace the empty tank back into the unit.

•Press the POWER button to restart the unit.

NOTE: If the “Water Full” LED is still on, check if the water tank float is

correctly placed and free from any blocking.

D. Continuous drainage

For continuous operation or unattended dehumidification, please connect the attached

drain hose to the unit. Condensate water drains freely into a bucket or drainage hole by

using gravity. Remove the rubber plug attached to the continuous drain connector from the

back of the device before connecting the hose. Remove the water tank and lock with the

rubber plug removed, the hole on the front of the device, which normally drains the water in

the tank, thus water being directed to be discharged through the rear part to which it

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Smart 10 eco in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 13.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Turbionaire Smart 10 eco Manual

Product: