804681
12
Zoom out
Zoom in
Previous page
1/56
Next page
12
SETTINGS
Start-up and Shutdown
-Press POWER to turn REVIGO 10 on.
-The unit runs in in FAN as default.
-Press MODE button to select the desired operation mode.
-Press POWER again to turn off the power.
OPERATION MODE
REVIGO 10 has four operation modes: Cool, Dry, Fan, Sleep.
Cooling your room - Select COOL Mode to lower the temperatur
e in your room.
-Press MODE button repeatedly until the LED of COOL operation lights
up.
-Press Up/Down button to adjust the temperature which is displayed
on the screen. The temperature can be set between 16 and 32.
-Press SPEED button repeatedly until the desired fan speed indicator
lights up.
-To control the direction of the air flow horizontally, please adjust the
inner louver by hand.
Note: The air conditioner stops if the room temperature is lower than
selected temperature.
Ventilating your room
-Press MODE button repeatedly until the LED of FAN operation lights up. In ventilation mode
the room air is circulated, but not cooled.
-Press SPEED button repeatedly to select the fan speed as desired.
Drying your room
Press MODE button on the control panel or remote control, the LED of DRY operation lights up.
The fan speed is unable to select. User should connect the hose to the drain outlet at the
bottom of the unit.
REMOTE CONTROL
Note: In this mode, the fan speed switches over to low speed and cannot be selected.
Sleep Modethis function can only be used with a remote control)
The sleep mode can be activated when in cool mode.
In Cool Mode :
After 1 hour the preset temperature is increased by 1 , after another hour the preset
temperature will again be increased by 1 .
TIMER Setting (1 h - 24 h)
The timer has two ways of operation:
To turn OFF (When POWER On) - Press Timer key to turn on the timer function - Press Up/
Down repeatedly to set the delay OFF time.
To turn ON (When POWER Off) - Press Timer key to turn on the timer function - Press Up/
Down repeatedly to set the delay ON time.
Cance TIMER - Press Up/Down repeatedly until the LED shows ‘00’.
Note: when press POWER will also exit the timer setting.
Automatic Defrost - At low room temperatures, frost may buildup at the evaporator
during operation. The unit will automatically start defrosting and the POWER LED
blinking. The defrost control sequence is as follows:
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turbionaire Revigo 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Revigo 10 in the language / languages: English, French, Italian as an attachment in your email.

The manual is 6.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info