Manual Turbionaire Epi 12 (page 8 of 116) (English, German, French, Italian, Spanish)

804596

Zoom out

Zoom in

1/116

can possibly be released to the surrounding space. Prior to work taking place, the area

around the equipment is to be surveyed to make sure that there are no flammable hazards

or ignition risks. “No Smoking” signs shall be displayed.

vii. Ventilated area

Ensure that the area is in the open or that it is adequately ventilated before breaking into

the system or conducting any hot work. A degree of ventilation shall continue during the

period that the work is carried out. The ventilation should safely disperse any released

refrigerant and preferably expel it externally into the atmosphere.

viii. Checks to the refrigeration equipment

Where electrical components are being changed, they shall be fit for the purpose and to the

correct specification. At all times the manufacturer’s maintenance and service guidelines

shall be followed. If in doubt consult the manufacturer’s technical department for

assistance.

The following checks shall be applied to installations using flammable refrigerants:

-The charge size is in accordance with the room size within which the refrigerant

containing parts are installed;

-The ventilation machinery and outlets are operating adequately and are not

obstructed;

-If an indirect refrigerating circuit is being used, the secondary circuit shall be

checked for the presence of refrigerant;

-Marking to the equipment continues to be visible and legible. Markings and signs

that are illegible shall be corrected;

-refrigeration pipe or components are installed in a position where they are unlikely

to be exposed to any substance which may corrode refrigerant containing

components, unless the components are constructed of materials which are

inherently resistant to being corroded or are suitably protected against being so

corroded.

ix. Checks to electrical devices

Repair and maintenance to electrical components shall include initial safety checks and

component inspection procedures. If a fault exists that could compromise safety, then no

electrical supply shall be connected to the circuit until it is satisfactorily dealt with. If the

fault cannot be corrected immediately but it is necessary to continue operation, an

adequate temporary solution shall be used. This shall be reported to the owner of the

equipment so all parties are advised.

Initial safety checks shall include:

-Those capacitors are discharged: this shall be done in a safe manner to avoid

possibility of sparking;

-That there no live electrical components and wiring are exposed while charging,

recovering or purging the system;

-That there is continuity of earth bonding

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Epi 12 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 10.72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Turbionaire Epi 12 Manual

Product: