Manual Turbionaire Arte 100 (page 7 of 92) (English, German, French, Italian, Spanish)

804611

Zoom out

Zoom in

1/92

The gap between the switch contacts must be no less than 3 mm.

* Switch off the appliance at the installations main switch:

a) if the appliance does not function correctly;

b) before cleaning the outside of the appliance ;

c) if the appliance is not to be used for any length of time.

* The room must have an adequate source of replacement air for this appliance to function effectively. Moreover, if

there is any non sealed combustion based appliance such as a water heater, gas stove, etc. in the same room, air

replacement must be suffcient for all appliances to work effectively together.

* The appliance must either exhaust directly to the outside or into a short duct (max 400 mm in length to ensure

certifed performance). Effciency losses will occur if the appliance is installed in ducting subject to any appreciable

back pressure.

* The appliance cannot be used to control activation of water heaters, room heaters, etc. nor must it be connected to

the hot air ducts used by other appliances.

* The air to be extracted from the room must be clean (i.e. free of grease, soot, chemical and corrosive agents, and

explosive or fam mable mixtures) and must not exeed a temperature of 40°C.

* Keep the appliances inlet and outlet grilles free to ensure an optimum fow of air.

* Install the appliance so that the impeller is inaccessible from the air outlet side as verified by contact with the

Test Finger, in compliance with the current safety regulations. If this is not possible, the relevant protection

accessory must be installed.

* Model (H): do not cover or obstruct the humidity sensor grille.

* Model(M): do not cover the lens of the presence sensor.

NOTICE (For Fan with front shutter items)

1. The shutter operationed by Electric-Thermo Switch automatic open and close .

2. Don 't push the Fan shutter by hand or else tooling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Arte 100 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6.74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Turbionaire Arte 100 Manual

Product: