Manual Tunturi T70 loopband (page 4 of 76) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

542704

Zoom out

Zoom in

1/76

POWER CORD AND GROUNDING

INSTRUCTIONS

Plug the socket end of the power cord into the

treadmill at the left front corner. Before connecting

the device to a power source, make sure that local

voltage matches that indicated on the type plate.

The treadmill operates at 110 V or 230 V.

This treadmill must be grounded. If it should

malfunction or breakdown, grounding provides

a path of least resistance for electrical current to

reduce the risk of electrical shock. This product

is equipped with a cord having an equipmentgrounded

conductor and a grounding plug.

The plug must be plugged into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Do not use extension cables when connecting the

equipment to the power source.

DANGER! Improper connection of the

equipmentgrounding

conductor can result in a risk of electric

shock. Check with a qualiﬁ ed electrician or

serviceman, if you are in doubt as to whether the

product is properly grounded. Do not modify the

plug provided with the product - if it will not ﬁ t the

outlet, have a proper outlet installed by a qualiﬁ ed

electrician.

SAFETY TETHER KEY

The treadmill cannot be used if the tether key

is not properly installed on the console; if the

key is removed from its place, the treadmill will

immediately stop. Place the safety tether key in

its place on the console. Ensure that the clip of

the safety tether key is properly attached to your

clothing; as the cord tightens, make sure the clip

does not detach itself from your clothing before the

safety tether key disconnects from the console.

CONSOLE

KEY FUNCTIONS

Major Function Keys:

1. ELEVATION +: Increases the elevation level

in the range from 0% to 12% shown in the

HEART RATE / ELEVATION Display. Pressing

once increases 1 % and to speed up the

decrement by pressing and holding it for 2

seconds.

2. ELEVATION –: Decreases the elevation level

in the range from 0% to 12% shown in the

HEART RATE/ ELEVATON Display. Pressing

once increases 1 % and to speed up the

decrement by pressing and holding it for 2

seconds.

3. RESET: Press this button to turn on or turn off

the power.

4. START/STOP: Starts or stops the program.

5. SELECTION DIAL: The selection dial functions

in two ways:

a) Rotating the dial. By rotating the dial

clockwise, you can increase setting values

and scroll the programs in an order of the

programs. By rotating the dial anticlockwise,

you can decrease setting values and scroll the

programs in an order of the programs. During

preset proﬁ les and [HRC] you can adjust the

intensity by rotating the dial.

b) Pressing the dial is [ENTER]. By pressing the

dial, you can accept the selection you made

when rotating the dial.

6. SPEED +: Increases the speed level in the

range from 0.8 to 20.0 KPH (0.5 to 12,5 MPH)

shown in the SPEED Display. Pressing once

increases 0.1KPH (0.1 MPH) and to speed up

the increment by pressing and holding it for 2

seconds.

7. SPEED –: Decreases the speed level in the

range from 0.8 to 20.0 KPH (0.5 to 12,5 MPH)

shown in the SPEED Display. Pressing once

decreases 0.1 KPH (0.1 MPH) and to speed up

the decrement by pressing and holding it for

2 seconds.

8. PSC: Position Speed Control (PSC) allows you

to adjust the track speed without touching

the console by changing your position on

the track during exercise. The PSC function

requires the use of a heart rate monitor. PSC

can be used with manual exercises, HRC

exercises with elevation adjustments and with

the [Rolling Hills] proﬁ le.

Sped Hot Keys:

6 Speed Hot Keys are set as 4, 6, 8, 10, 12, and 14 KPH or

set as 2, 3,4,5,6,7 MPH. For example, the speed changes

from any speed to 8 KPH by pressing the Speed Hot Key 8.

Elevation Hot Keys:

6 Incline Hot Keys are set as 0,2,4,6,8 and 10% For

example, the elevation level changes from any level to 4%

by pressing the Elevation Hot Key 4.

LED INDICATORS & DISPLAYS AND

OPERATING RANGES

The default values are PROGRAM = Manual (M), TIME

= 00:00 (counting up), SPEED = 0,8 KMH / 0,5 MPH,

DISTANCE = 0.00 (counting up), KCAL = 0 (counting

up), HEART RATE = 0, and ELEVATION = 0.

A. 2 LED Indicators : The HEART RATE Indicator

is on and the HEART RATE /ELEVATION Display

shows heart rate. The ELEVATION Indicator is on

and the HEART RATE / ELEVATION Display shows

elevation level.

B. Program Display : Shows the information in

action and chosen by using the SELECTION

DIAL. P1 to P9 and 3 user-settings modes can be

chosen from.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi T70 loopband in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tunturi T70 loopband Manual

Product: