Manual Tunturi Pure loopband RUN 10.0 (page 16 of 204) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

542639

Zoom out

Zoom in

1/204

To stop the equipment:

1. Set the mains power switch to the off position.

2. Remove the mains plug from the wall socket.

3. Remove the mains plug from the equipment.

Safety key (fig. E)

The equipment is equipped with a safety key that must be properly inserted into the

console to start the equipment. If you remove the safety key from the console, the

equipment will stop immediately.

1. Insert the safety key into the slot in the console.

2. Make sure that the clip of the safety key is properly attached to your clothing.

Make sure that the clip is not removed from your clothing before the safety key is

removed from the console.

Circuit breaker

The equipment is equipped with a circuit breaker that interrupts the circuit when the

electricity load is above the maximum capacity. When this occurs, the circuit breaker

must be pressed.

WARNING

– Before pressing the circuit breaker, remove the mains plug from the

equipment.

If the equipment shuts down, proceed as follows to restart the equipment:

1. Remove the mains plug from the equipment.

2. Press the circuit breaker to restart the equipment.

3. Insert the mains plug into the equipment.

Adjusting the support feet

The equipment is equipped with 4 support feet. If the equipment is not stable, the

support feet can be adjusted.

1. Turn the support feet as required to put the equipment in a stable position.

2. Tighten the locknuts to lock the support feet.

16 RUN 10.0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Pure loopband RUN 10.0 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tunturi Pure loopband RUN 10.0 Manual

Product: