736488

Tunturi Platinum Upper body unit Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
www.tunturi.com 11 4 in 1 Strength Station Owner’s Manual
Figure 3
Item # Description Qty
13 Right Swing Arm Assembly 1
14 Left Swing Arm Assembly 1
15 Right Press Arm Assembly 1
16 Left Press Arm Assembly 1
17 1” Arm Shaft 1
18 Spacer 1
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
Step 3:
Item # Description Qty
32 Press Arm Lock (Optional) 1
42 Wavy Washer 2
43 1” Snap Ring 2
54 Shaft Collar 2
Make Sure All Hardware
I
s Tightened Before Next
S
tep.
*
* See the sheet packaged with
the Press Arm Lock for
instructions if you wish to lock
the Press Arms together.
Press Arm Lock*
(Optional)
Platinum by Tunturi 22 4 in 1 Strength Station Owner's Manual
• Clean guide rods with a lint-free cloth and apply a thin layer of silicon lubricant to each guide rod. This will ensure a glass smooth
performance from your weight stack.
Step 14:
Weight Stack Decals:
Serial Number:
Guide Rod Lubrication:
• Record your serial number on the front of this manual and keep
for your records. The serial number can be found on the back of
the cage as seen in the figure.
200lb Stack (Standard)
www.tunturi.com 23 4 in 1 Strength Station Owner’s Manual
Note: All cables with threaded adjustable ends must
have at least 1/2” of the threads threaded into its
counterpart. It is very important that the 1/2” Jam
Nut be wrench tightened to the counterpart to
ensure that the threaded adjustable end of the
cable does not back out of its counterpart.
• Adjust cables to proper tension from any of the locations
shown below.
• How to Begin: In order to get the proper tension in your
cables, it is recommended that you follow the sequence
1-5 as shown on pages 24 and 25. The numbers for this
sequence can be found in the upper left corner of each of
the detailed views. Each detailed view below will refer
you to the original Figure for more detailed information.
Follow the detailed information found in each referenced
figure.
• Note: If the top plate raises off of the sec-
ond plate in the weight stack, then the
cable tension is too tight. You will need to
take some of the tension out to lower the
Top plate flush with the second plate.
4
2
Refer to Figure
8 and 11
1
Refer to Figure
6
Refer to Figure
7
Cable Adjustments
PG6241說明書101025 拚版用-16.indd 21-22 2010/11/3 20:16:47
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi Platinum Upper body unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Platinum Upper body unit in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info