736488

Tunturi Platinum Upper body unit Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
Platinum by Tunturi 6 4 in 1 Strength Station Owner's Manual
www.tunturi.com 7 4 in 1 Strength Station Owner’s Manual
Platinum by Tunturi 26 4 in 1 Strength Station Owner's Manual
Final Assembly and Troubleshooting
Pulley Cover
IMPORTANT - Check These Components Before Using Gym:
• Position the cable guard tab on the Pulley Cover so that the tab prevents the cable from
coming out of it’s track on the 3 1/2” Pulley. An example of this positioning can be seen in
the figure to the right. The cable guard tab should be positioned so that it is in the middle of
the cable wrap on the 3 1/2” Pulley, between points “A” and “B”. This will allow better
protection and prevent the cable from rubbing the cable guard tab. Refer to Steps 8, 9, 12,
and13.
• Each Cable with a threaded bolt on either end must be threaded at least 1/2” into its attachment, whether it be a Free Floater,
Lockout Free Floater, or the Top Plate of the weight stack. Each must also be secured with a 1/2” Jam Nut to ensure a safe and
proper connection. Refer to Steps 6, 7, 8, 9, 12, and 13. See Figures below.
• Each Adjustment Leveler must be threaded 1/2” into its counterpart. Each must be secured with a 3/8” Jam Nut to ensure a
safe proper connection. Refer to Steps 3, 8, 9, 12, and 13. See Figures below.
Top Plate
1/2” Jam Nut
Free Floater w/ Lockout
Beveled Leveler
3/8” Jam Nut
www.tunturi.com 27 4 in 1 Strength Station Owner’s Manual
Platinum by Tunturi strives to give you the very best in quality, performance and safety through carefully engineered designs and
excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be
followed.
Clean upholstery, grips, and roller pads with mild soap and water generally after every use. The guide rods, chrome slides and frame
should be cleaned with a cotton cloth. Upon cleaning the guide rods, a thin layer of Silicone or Teflon gel should be applied to each
rod to ensure a glass smooth performance.
An overall inspection should be done before each workout. If the warning and safety decals are worn or have been removed they
should be replaced immediately. The cables and cable systems should be inspected for signs of wear and proper tension. In order to
check cables properly you should carefully run the cable through your fingertips, checking for signs of wear, cracks, burs and thinning
spots. Replace any part at first signs of wear. Cables should be adjusted for proper tension. See assembly instructions for this
detail. All hardware, stops, and adjustments should be checked and tightened as required.
The guide rods on your machine should be cleaned and lubricated regularly. This will ensure a glass smooth performance from your
weight stack. A thin layer of either Silicone or Teflon gel should applied to each rod. Each pillow block bearing and flange bearing
has a grease fittings that must be lubricated regularly. Use general purpose bearing grease and follow the schedule below.
Although cables should be inspected daily, it is important that ALL cables be replaced as directed in the schedule below. Please note
that at any first sign of wear the cable should be replaced immediately.
If there are any questions concerning maintenance, please contact your local Tunturi dealer or contact Platinum by Tunturi directly at:
www.Tunturi.com
Daily Weekly Monthly Quarterly Years
Clean
Upholstery X
Hand Grips X
Roller Pads X
Guide Rods X
Chrome Slides X
Frame X
Inspect
Overall X
Safety Decals X
Cables X
Cable Tension X
Pulleys X
Hardware X
Stops X
Upholstery X
Hand Grips X
Frame X
Bushings X
Bearings X
Lubricate
Guide Rods X
Bearings 1
Replace
Cables 3
Preventive Maintenance
PG6241說明書101025 拚版用-16.indd 11-12 2010/11/3 20:16:42
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi Platinum Upper body unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Platinum Upper body unit in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info