548098
4
Zoom out
Zoom in
Previous page
1/82
Next page
English
Step 2: Front handlebars & upright tube
assembly
1. Install the upright tube cover (31) onto the upright
tube (2), making sure it is facing the correct direction
as in the picture below. Run the two cables (44, 45)
through the bottom of the upright tube and out the top
opening.
2. Install the Upright tube (2) into the receiving tube of
the Main Frame (1) with six 5/16” × 5/8” Hex
Head Bolts (68), four 5/16” × 18mm Flat Washers
(76) on the sides of the tube and two 5/16” ×
19mm Curved Washers (83) on the front of the tube.
Pull slightly on the cables while installing the upright
tube to avoid cutting the cables.
3. Remove the white Styrofoam pad (installed by factory
to prevent bolts from being accidentally dropped into
the Bike).
4. Install the Computer Cable (44) and Hand Pulse
Sensor Assembly W/Cable (45) into the connector
in the back of the Console (19). Install the console
onto the mounting plate with four M5×12mm Phil-
lips Head Screws (99). Be careful not to pinch the
cables between the console and the mounting plate.
This could short circuit the cables and damage the
electronics.
5. Install the Fixed Handle bar Assembly (3) onto the
Upright tube (2) with two 5/16” × 5/8” mm Hex
Head Bolts (68), two 5/16” × 18mm Flat Washers
(76) and two 5/16” Split Washers (82).
2.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi Platinum Recumbent at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Platinum Recumbent in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info