Manual Tunturi Platinum Pro Cross (page 5 of 108) (English, German, Dutch, French)

670021

Zoom out

Zoom in

1/108

Owner’s manual

•

PLATINUM PRO

Electrical safety

(only for equipment with electric power)

• Before use, always check that the

mains voltage is the same as the

voltage on the rating plate of the

equipment.

• Do not use an extension cable.

• Keep the mains cable away from

heat, oil and sharp edges.

• Do not alter or modify the mains

cable or the mains plug.

• Do not use the equipment if the

mains cable or the mains plug is

damaged or defective. If the mains

cable or the mains plug is damaged

or defective, contact your dealer.

• Always fully unwind the mains cable.

• Do not run the mains cable

underneath the equipment. Do not

run the mains cable underneath a

carpet. Do not place any objects on

the mains cable.

• Make sure that the mains cable does

not hang over the edge of a table.

Make sure that the mains cable

cannot be caught accidentally or

tripped over.

• Do not leave the equipment

unattended when the mains plug is

inserted into the wall socket.

• Do not pull the mains cable to

remove the mains plug from the wall

socket.

• Remove the mains plug from the

wall socket when the equipment

is not in use, before assembly or

disassembly and before cleaning and

maintenance.

SAVE THIS INSTRUCTION MANUAL

Assembly

Step 1:

Rear Rail and Pedal Tube Assembly

1. Slide the rail assembly (2) under the

rear support tube of the main body.

Bolt the two together with two 3/8”

x 2-1/4” bolts (97) and 3/8” washers

(100) from the top of the tube, and

four 3/8” x 3-3/4” bolts (98) and 3/8”

curved washers (99) through the front

of the support tube. Make sure all six

bolts are tightened very securely.

2. Attach the two foot pedals (52 left &

53 right) to the pedal mounting plates

with eight M5 x10mm Phillips head

screws (112).

3. Assemble the inner pedal tube

assemblies (5 & 6) to the crank

axles of the main body. The bearings

in the pedal tubes should slide

onto the axles, do not force them

because damage to the bearings can

occur. The pedal tubes have been

previously assembled at the factory

to assure the correct fit. Secure the

pedal tubes with two 5/16” x 18mm

bolts (111) and 5/16” washers (84).

4. Install the two covers (50 right, 49

left) over the pedal tube connection

at the axle with two M6 x 15mm

Phillips head screws (94). Install the

two roller covers (54) with four M5 x

12mm Phillips head screws (77).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Platinum Pro Cross in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tunturi Platinum Pro Cross Manual

Product: