548095
4
Zoom out
Zoom in
Previous page
1/76
Next page
4
English
Assembly
Start by unpacking the equipment. The detailed assembly
instructions can be found at the back of this guide. Follow
the instructions in given order.
Before assembly, check the contents of the package. If
a part is missing, please contact your dealer with the
model, equipment serial no. and spare part no. of the
missing part. You’ll find a spare part list at the back of this
guide. The hardware kit contents are marked with * in the
spare parts list. The directions left, right, front and back
are defined as seen from the exercising position. Keep the
assembly tools, as you may need them e.g. for adjusting
the equipment. Note that two people are needed for the
assembly.
The packaging includes a silicate bag for absorbing
moisture during storage and transportation. Please dis-
pose of the bag once you have unpacked the equipment.
Allow at least 100 cm of clearance around the equip-
ment. We also recommend opening the package and
assembling the product on a protective base.
Step 1: Upright tube
1. The tension adjustment cable and speed sensor wire
are pre-installed to the upright tube and main frame
so be careful not to pull too hard on the upright tube-
during assembly to avoid damaging them. Connect
the two speed sensor wires together.
2. Lift the upright tube (2) into place and align it so that
the locating pins in the mounting plate are set into
the holes in the mating plate of the main frame. Be
careful not to pinch the speed sensor wire between
the upright tube and the main frame plates during
assembly.
3. Secure the upright tube in place with the four M10
x 20mm stainless steel bolts (49) and M10 split
washers (56). Make sure the bolts are securely tigh-
tened.
4. Install the fixed handlebars (3) to the upright tube with
four M10 x 25mm stainless steel bolts (50) and M10
split washers (56). Make sure the bolts are securely
tightened.
1.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi Platinum Cross Sprinter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Platinum Cross Sprinter in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 9,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info