Manual Tunturi E60 (page 3 of 88) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

542667

Zoom out

Zoom in

1/88

E60 - OWNER’S MANUAL ENGLISH

cord does not run underneath the equipment.

• Do not alter (for example lengthen) the cord between

the transformer and the unit.

NOTE ABOUT ASSEMBLING THE EQUIPMENT

Start by unpacking the equipment. The detailed assembly

instructions can be found at the back of this guide. Follow

the instructions in given order.

Before assembly, check the contents of the package.

If a part is missing, please contact your dealer with the

model, equipment serial no. and spare part no. of the

missing part. You’ll nd a spare part list at the back of this

guide. The hardware kit contents are marked with * in the

spare parts list. The directions left, right, front and back

are dened as seen from the exercising position. Keep the

assembly tools, as you may need them e.g. for adjusting

the equipment. Note that two people are needed for the

assembly.

The packaging includes a silicate bag for absorbing

moisture during storage and transportation. Please dispose

of the bag once you have unpacked the equipment.

Allow at least 100 cm of clearance around the

equipment. We also recommend opening the package

and assembling the product on a protective base.

SAVE THIS INSTRUCTION MANUAL

ASSEMBLY

Start by unpacking the equipment and check that you

have the following parts:

1. Frame

2. Rear and front support

3. Pedals (2 pcs)

4. Handlebar

5. Console

6. Transformer

7. Assembly kit (contents marked with in the spare part

list): keep the assembly tools, as you may need them

e.g. for adjusting the equipment.

If necessary, please contact your dealer with the model,

equipment serial no. and spare part no. of the missing

part. You’ll nd a spare part list at the back of this guide.

The packaging includes a silicate bag for absorbing

moisture during storage and transportation. Please dispose

of the bag once you have unpacked the equipment. The

directions left, right, front and back are dened as seen

from the exercising position. We recommend that the

equipment is installed by two adults.

REAR AND FRONT SUPPORT

By holding on to the seat, incline the equipment

backwards so that it rests on its transportation wheels.

Attach the rear support from below with four hexagonal

socket head screws and washers. Attach the front support

to the frame with four screws and washers. Restore the

equipment to its upward position so that it rests on the

support feet.

PEDALS

The pedals are distinguished by the markings R (= right)

and L (= left) on their shafts. Fasten the right pedal to the

right pedal crank turning clockwise and the left pedal to

the left pedal crank turning counterclockwise. Fasten the

pedal bands rst into the retainer at the device. Thread

the band through the pedal loop and push the band

opening into the projection in the pedal. Fasten the pedal

bands to the pedal outside. Push the band through the

locking buckle and the band locks automatically. The

length of the band can be adjusted with the locking

buckle.

HANDLEBAR

Attach the cable coming from the frame tube to the

connector at the bottom of the handlebar. Ensure that

the joint is securely locked by gently pulling the wire.

Thread the wire carefully inside the frame tube. Open the

handlebar locking knob by turning it anticlockwise a few

times and then pulling it outwards. Insert the handlebar

into the front frame tube. Release the locking knob once

the handlebar has reached the required level. Ensure that

the handlebar is locked. Secure and tighten the locking

knob by turning it clockwise.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi E60 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tunturi E60 Manual

Product: