736357
19
Zoom out
Zoom in
Previous page
1/84
Next page
19
English
During the process of pulse measurement,
because of the contact jamming, the
measurement value may be higher than
the virtual pulse rate during the first 2~3
seconds, then will return to normal level.
The measurement value cannot be regarded
as the basis of medical treatment.
Explanation of buttons
MODE
- Press MODE button to select console functions;
Time, Speed, Distance, Odometer, Calorie,
Pulse.
- Push and hold for 4 seconds to reset: Time,
Distance, Calorie & Pulse.
SET
Set the values for: Time, Distance, Calorie & Pulse
When not in Scan mode.
- Press SET button to set console in goal input
mode.
- Press MODE to select goal you like to set. (the
selected goal will blink when able to set value.)
- Press SET Button to higher the goal input, hold
SET button to higher the value fast.
- Press RESET button shortly to reset the
changed selected goal.
- Press MODE Button to active next optional goal
to be set.
TIME + 1 min ( 1 ~ 99)
SPEED ( max. 99,9 Km/h)
DIST + 0,5KM ( 0,5KM ~ 99,50Km )
ODO ( max. 999,9 Km)
CAL + 1 ( 1 ~ 999 )
PULSE + 1 ( 40 ~ 240 )
NOTE
When you set a goals the set goal value will
count down in active mode.
When goal is reached the console will
notify by 4 dual acoustic beep signals. The
reached value will now count up starting
from “0”.
You can set more than one goal, all goals
will notify when goal is reached.
RESET
- Push and hold for 4 seconds to reset: Time,
Calorie & Distance
NOTE
Odometer can only be reset by a batteries
exchange.
Extra notes
- If the display is faint or shows no figures, please
replace the batteries.
- The monitor will automatically shut off if there is
no signal received after 4 minutes .
- The monitor will be auto-powered on when
starting to exercise push button w/signal in.
- The monitor will automatically start calculating
when you start to exercise and will stop
calculating when you stop exercising for 4
seconds .
Cleaning and maintenance
The equipment does not require special
maintenance. The equipment does not require
recalibration when it is assembled, used and
serviced according to the instructions.
WARNING
Do not use solvents to clean the equipment.
Clean the equipment with a soft, absorbent
cloth after each use.
Regularly check that all screws and nuts
are tight.
If necessary, lubricate the joints.
Replacing the batteries
The console is equipped with 2 AA batteries at
the rear of the console.
- Remove the cover.
- Remove the old batteries.
- Insert the new batteries. Make sure that
batteries match the (+) and (-) polarity markings.
- Mount the cover.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi Cardio Fit Cross C30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Cardio Fit Cross C30 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info