542693

Tunturi C80 Manual

10
Zoom out
Zoom in
Previous page
1/96
Next page
10
OWNER'S MANUAL
•
C80
4. Set the ending point for the session using the
selection dial.
5. Start your training session by pedalling. You can
change gears (1–4) using the selection dial. During
training, you can display altitude profile or heart
rate using the selection dial. The heart rate display
requires heart rate measurement.
6. Once you have completed the route, the meter
beeps and the training session ends.
7. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session by
selecting CONTINUE.
T-ROAD
IMPORTANT: You can only carry out a T-ROAD
training session when the memory stick is inserted
in the meter. T-ROAD is similar to T-RIDE, but during
a T-ROAD training session, you can also see your
progress on a video. During training, you can display
the altitude profile or video using the selection dial.
T-MUSIC
IMPORTANT: You can only carry out a T-MUSIC
training session when the memory stick is inserted
in the meter. T-MUSIC programs are controlled
by heart rate. During training, the music tempo
changes according to the effort level of the training
session. The duration of the T-MUSIC program is
40 minutes. You cannot change the selected heart
rate level during training. The program requires
measurement of heart rate.
1. Select T-MUSIC.
2. Select a program (1–3) using the selection dial.
Confirm your selection by pressing the selection
dial.
3. Start the program by pedalling. During training,
you can display effort or heart rate using the
selection dial.
4. After 40 minutes, the meter beeps and the
training session ends.
5. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session by
selecting CONTINUE.
OWN TRAINING
You can create and save up to 100 training programs
on the meter.
SAVING A PROGRAM
1. End your training session by pressing BACK/STOP.
2. Select SAVE AND EXIT and confirm your selection.
3. Enter a name for the training session and confirm
it using the selection dial.
IMPORTANT! You can only save programs that are
longer than 10 minutes.
IMPORTANT! To save a training session you will need
to select a username.
USING SAVED PROGRAMS
1. Select OWN TRAINING.
2. Select a training session from the list.
3. Select the desired execution method:
A) Replay = repeat a previously saved exercise.
B) Edit = edit the duration of a previously saved
exercise before you start.
C) Race = compete against a previously saved
workout.
NOTE! You can only use programme profiles
created in the Manual function. These profiles
show effort as a constant torque (Nm).
4. Confirm your selection by pressing the selection
dial.
A) Replay = start pedaling to begin the exercise.
You can adjust the effort level with the selection
dial.
B) Edit = select the duration of the exercise with
the selection dial (set the time to 10-180 minutes).
Start pedaling to begin the exercise. You can
adjust the effort level with the selection dial.
C) Race = Using the selection dial, select the race
mode (time: the distance you can pedal in a given
time; or distance: how fast you can cover a given
distance) and confirm your selection using the
selection dial. The display shows a previously
saved program. Start pedalling to begin the race.
The dash line on the display shows whether you
are ahead or behind the benchmark training
session, which is the most recently saved training
session using this program. The distance to the
previously saved session is also displayed: the
previously saved training session is shown with a
light blue vertical dash line, and your race effort is
shown with a black vertical dash line.
5. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session by
selecting CONTINUE.
FITNESS TEST
The meter uses a multi-step fitness test. The test
begins at a low level of effort, which increases
steadily in accordance with the selected test type.
A multi-step test is a safe and reliable, submaximal
means of measuring a person’s physical fitness
level. The test continues until the test subject has
achieved his or her individual target heart rate (85%
of maximum heart rate). The test requires the use
of a heart rate belt: the meter monitors changes
in the heart rate throughout the test, using the
data to calculate an estimate of the tested person’s
maximum oxygen uptake capacity. The maximum
oxygen uptake capacity is the best measure of a
person’s physical fitness level. After the test, the
meter gives versatile information on your fitness
level: a description and a numerical value (ml/kg/
min).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi C80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi C80 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info