542687

Tunturi C45 Manual

6
Zoom out
Zoom in
Previous page
1/88
Next page
6
using the selection dial. Conrm your selection by
pressing the selection dial.
3. Using the selection dial, choose your target duration
for the session measured in time, distance or energy
consumption. Conrm your selection by pressing the
selection dial.
4. Set the target value for the session using the selection
dial: set time (10-180 minutes), distance (3-100 km) or
energy consumption (50 - 1999 kcal). Conrm your
selection by pressing the selection dial.
5. Start your training session by pedalling. Using the
selection dial, you can change the heart rate level (80-
220). During training, you can display resistance or heart
rate using the selection dial.
6. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
7. To stop the training session, press the BACK/STOP
button. You can then stop the session by selecting
EXIT, save the session to the memory by selecting
SAVE AND EXIT or continue your training session by
selecting CONTINUE.
WATT CONTROL
By selecting the WATT CONTROL programme, you can set
the desired effort value in Watts, i.e. pedalling effort will be
independent of pedal rotations. The set effort value can
also be changed during the workout.
1. Select WATT CONTROL.
2. Set the effort level (20 – 350 Watt) of your training session
using the selection dial. Conrm your selection by
pressing the selection dial.
3. Using the selection dial, choose your target duration
for the session measured in time, distance or energy
consumption. Conrm your selection by pressing the
selection dial.
4. Set the target value for the session using the selection
dial: set time (10-180 minutes), distance (3-100 km) or
energy consumption (50 - 1999 kcal). Conrm your
selection by pressing the selection dial.
5. Start your training session by pedalling. You can increase
or decrease the resistance (20 - 350 Watt) using the
selection dial. During training, you can display effort or
heart rate using the selection dial.
6. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
7. To stop the training session, press the BACK/STOP button.
You can then stop the session by selecting EXIT, save the
session to the memory by selecting SAVE AND EXIT or
continue your training session by selecting CONTINUE.
PROGRAMMES
This programme contains ready-made training proles.
The programme changes automatically the intensity
level during your workout. The display shows the prole
and the changes, and the intensity can be manually
adjusted.
1. Select PROGRAMMES.
2. Select a programme (pre-set prole P1 to P10 & user
prole P1 to P10) by using the selection dial. Proles
P1-P5 are Watt control programmes, P6-P10 are
target heart rate programmes requiring heart rate
measurement. Conrm your selection by pressing the
selection dial.
3. Using the selection dial, choose your target duration for
the session measured in time or distance. Conrm your
selection by pressing the selection dial.
4. Set the target value for the session using the selection
dial: time (10-180 minutes) or distance (3-100 km).
Conrm your selection by pressing the selection dial.
5. Start the programme by pedalling. You can increase or
decrease the resistance using the selection dial. During
training, you can display effort or heart rate using the
selection dial. The heart rate display requires heart rate
measurement.
6. Once the target value has been achieved, the meter
gives an audio signal. You can continue with your
exercise if you wish.
7. To stop the training session, press the BACK/STOP button.
You can then stop the session by selecting EXIT, save the
session to the memory by selecting SAVE AND EXIT or
continue your training session by selecting CONTINUE.
PROFILES P1-P5: WATT CONTROL PROGRAMMES
PROFILE P1. 3-peak effort prole for the improvement of
oxygen uptake capacity. With relatively low yet long
lasting peaks, this prole is suitable for beginners. With
default setting, max. Watt value is 125, average Watt
value is 98.
P1 Rolling Hills
0
25
50
75
100
125
150
175
200
225
Duration
Watt
PROFILE P2. 3-peak effort prole for the improvement of
oxygen uptake capacity. With peaks relatively short in
duration, this prole is suitable for beginners. With default
setting, max. Watt value is 150, average Watt value is 102.
P2 Hill Climb
0
25
50
75
100
125
150
175
200
225
Duration
Watt
PROFILE P3. Multi-peak effort prole for the improvement
of explosive strength. Peaks are relatively short in duration,
and the level of effort varies irregularly. This prole is
suitable for all tness levels. With default setting, max. Watt
value is 150, average Watt value is 117.
P3 Cross Country
0
25
50
75
100
125
150
175
200
225
Duration
Watt
PROFILE P4. Uphill effort prole for the improvement of
endurance tness. Peaks are relatively long-lasting,
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi C45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi C45 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info