782576
16
Zoom out
Zoom in
Previous page
1/48
Next page
Frost
If there is the risk of frost in a room, the device should not
be installed in this room. If, despite this advice, the device is
installed in a room where there is a risk of frost, the device
should be emptied before the risk arises.
Legend
Figure A
Number Description
1Housing
2Inner container
3Insulation
4Heating element
5Display
6Hot water outlet
7Decreaze temperature button
8On/off button
9Increaze temperature button
10 Set button
11 Cold water inlet
12 Anode
13 Power button
14 Plug
A safety unit must be used for installation.
Placement on the wall
Figure B
The appliance must be tted on a stable and solid wall. The wall must be able to at
least bear the total weight of a full wall boiler.
Determine a suitable place for the wall boiler. Insert the cotter bolts in the wall using a
suitable tool. Make sure that the cotter bolt hooks are facing upwards.
IMPORTANT: In the unlikely event that the device is
connected to the mains power supply without being
lled with water, or if for some reason the device
switches off after a short while, please disconnect
the plug from the wall socket to allow the device to
cool down.
Connection to the water supply
The water connections are 1/2“.
Connect the cold water supply to (11). Fit an inlet combination (3-way safety valve) in
between.
Always use the rubber rings with filter supplied to prevent leaks.
Connect (6) the piping for the hot water.
16
Figure A
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TTulpe Smart Master 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TTulpe Smart Master 100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info