681443

Trust ZYCT-202 REMOTE CONTROL - 71171 Zigbee Manual

3
Zoom out
Zoom in
Previous page
1/39
Next page
4 5
EN ZYCT-202 REMOTE CONTROL EN ZYCT-202 REMOTE CONTROL
COMPATIBILITY
The ZYCT-202 works with the Z1 ZigBee Bridge, ICS-2000 control
station and other Zigbee certified devices such as Philips Hue
(compatibility on trust.com/zigbee). With the ZYCT-202 it is not
possible to control the colors for the ZRGB-9 and the ZLED-9CW,
for this we advise to use the Z1 ZigBee Bridge or the ICS-2000.
1. BUTTONS
ON button to turn your lights/devices ON
OFF button to turn your lights/devices OFF
Dim up to increase the light brightness. Keep pressed for continuous
dimming
Dim down to decrease the light brightness. Keep pressed for
continuous dimming
Bulb selection. Press repeatedly to cycle through the bulb channels.
Press the smart group button to control all bulbs simultaneously
2. REMOVE PULL STRIP
A
Remove the battery pull strip
by pulling it from the remote
control. Only after removing
the pull strip the remote can
be used.
3. CONNECT REMOTE WITH
BULB
A
First select the bulb channel
you want to control the
bulb with.
B
Hold the remote as close
as possible to the bulb
and press and hold the ON
button to connect it.
C
Keep the ON button pressed
untill the bulb turns on and
o 3x.Keep holding the ON
button untill the bulb will
flash 2x to acknowledge that
the connection succeeded.
Note: To connect the remote
with the Z1 bridge or ICS-
2000 follow the steps in the
online (advanced) manual of
the Z1 ZigBee bridge or ICS-
2000. (trust.com/zigbee)
4. INSTALLING THE WALL
MOUNT
Remove the backplate of the
wall mount by lifting it up with
a flat screwdriver.
A
Place the backplate on a flat
surface and secure it tightly
with screws or use double
sided tape.
B
Attach the wall mount on
the backplate.
C
Place the remote on the wall
mount.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust ZYCT-202 REMOTE CONTROL - 71171 Zigbee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust ZYCT-202 REMOTE CONTROL - 71171 Zigbee in the language / languages: All languages as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info