774518
28
Zoom out
Zoom in
Previous page
1/104
Next page
28
ACM-2300-HC BUILD-IN SWITCH
ES
1. Deshabilitar la alimentación
Desconecte siempre la alimentación eléctrica (en la caja de fusibles) antes de instalar o desmontar
este producto. El ACM-2300-HC se puede utilizar para cualquiera de los dos interruptores de pared
conectados a una lámpara (circuito de hotel/escalera) o para un interruptor de pared individual
conectado a una lámpara.
2. Aflojar las luces del techo
Desmonte el equipo de luces del techo, dejando los cables conectados a la luz.
Las luces no pueden superar el máximo de vatios. Si no hay un cable con corriente (marrón), debe
instalarse. Los colores de los cables pueden variar entre países. Consulte con un técnico electricista si
tiene dudas sobre los colores de los cables.
3. Precauciones al pelar cables
3A. Asegúrese de pelar 5 mm del cable.
3B. Al conectar los cables al ACM-2300-HC, compruebe que los cables pelados estén colocados en el
módulo y que no se toquen entre sí ni queden expuestos. Esto puede producir un cortocircuito.
4. Desconectar el cable del interruptor y el cable neutro
Para instalar el ACM-2300-HC desconecte el cable del interruptor (negro) y el cable neutro (azul) de la
lámpara (desconectar del bloque de terminales o cortar los cables si es necesario)
5. Conectar el cable con corriente a un bloque de terminales
Conecte el cable con corriente (marrón) desde la caja del techo a un bloque de terminales. Conecte de
nuevo el otro extremo del cable con corriente (marrón) al mismo bloque de terminales.
6A. Conectar los cables al módulo
Conecte el cable neutro (azul) desde la caja del techo hasta el contacto exterior [N] del módulo.
Conecte el cable del interruptor (negro) desde la caja del techo al contacto [S].
Conecte el cable neutro (azul) desde la lámpara hasta el contacto del medio [N].
Conecte el cable del interruptor (negro) desde la lámpara al contacto [ L ].
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust ACM-2300-HC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust ACM-2300-HC in the language / languages: All languages as an attachment in your email.

The manual is 4.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info