774521
6
Zoom out
Zoom in
Previous page
1/68
Next page
6
ACM-2000 BUILD-IN SWITCH
EN
1. Switch o the mains voltage
2. Remove the existing lighting
Detach the existing lighting and disconnect the wires. Do not exceed the maximum load: 2000W.
3. Connect the live and neutral wire
Connect the live wire to the outer left [L] terminal. Connect the neutral wire to the outer right [N]
terminal. Tighten the clamping screws.
4. Connect the switch wire and neutral wire to the lamp
Connect the (black) switch wire from the lamp to the [L
L
] socket.
Connect the (blue) neutral wire from the lamp to the left [N] contact.
5. Switch on the mains power (electric meter box) to continue the installation
Shock hazard! Do not contact any exposed wiring. Only touch the plastic housing of this product.
6. Activate learn-mode
Press the learn-button on the receiver for 1 second. The learn-mode will be active for 12 seconds and
the LED-indicator will blink slowly.
7. Assign Trust Smart Home transmitter code
While the learn-mode is active, send an ON-signal with any Trust Smart Home transmitter to assign
the code to the receiver’s memory.
8. Code confirmation
The LED will flash fast to confirm the code has been received. The receiver can store up to 32 dierent
transmitter codes in its memory. The memory will be preserved when the receiver is moved to
another location or in case of power failure.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust ACM-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust ACM-2000 in the language / languages: All languages as an attachment in your email.

The manual is 2.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info