681444
5
Zoom out
Zoom in
Previous page
1/15
Next page
8 9
ES SMART LED LIGHTS
COMPATIBILIDAD
La lámpara LED Smart funciona con nuestro Z1 ZigBee Bridge, la estación de
control ICS-2000, un mando a distancia y otros dispositivos certificados ZigBee
como Philips Hue (consultar compatibilidad en trust.com/zigbee). Para el control
del color es necesario un bridge o una estación de control.
1. INSTALACIÓN
Instale la lámpara en un portalámpa-
ras. (No instale la lámpara detrás de
un atenuador existente). Encienda la
lámpara mediante el interruptor de
luz convencional.
2. DESCARGA DE LA APP
Para utilizar la lámpara con un Z1
ZigBee Bridge o una ICS-2000, des-
cargue la app escaneando el código
QR o visite trust.com/zigbee. Cuando
se utilice la lámpara con el mando a
distancia siga los pasos descritos en
el manual del mando a distancia.
3. SIGA LAS INSTRUCCIONES DE
LA APP
Abra la app y siga las instrucciones
para conectar la lámpara. La luz par-
padeará 2 veces para confirmar que
la conexión se ha realizado correc-
tamente. Nota: Las bombillas/puntos
de luz RGB de ZigBee se iluminan de
color verde durante 10 segundos para
confirmar la conexión.
PONGA LA LÁMPARA EN MODO DE
CONEXIÓN PARA EL ZIGBEE BRIDGE
(AL IGUAL QUE CON Z1/ICS-2000)
Se puede poner la lámpara en modo
de conexión (reinicio) encendiendo y
apagando 5 veces la lámpara con el
interruptor tradicional o atornillando/
desatornillando la lámpara 5 veces
en el portalámparas. La lámpara
parpadeará 4 veces para confirmar el
modo de conexión (reinicio). El modo
de conexión dura 20 segundos.
El rango inalámbrico aumenta al agregar
más productos ZigBee (red en malla o “mes-
hing”). Para obtener más información acerca
del meshing, visite www.trust.com/zigbee
COMPATIBILIDADE
A lâmpada LED inteligente funciona com a nossa Z1 ZigBee Bridge, a estação
de controlo ICS-2000, o comando remoto e outros produtos com certificação
ZigBee, como o Philips Hue (compatibilidade em trust.com/zigbee). Para
controlar a cor, é necessária uma bridge/estação de controlo.
1. INSTALAÇÃO
Coloque a lâmpada num casquilho.
(Não instale a lâmpada por trás de
um reóstato existente!) LIGUE a lâm-
pada no interruptor tradicional.
2. DESCARREGUE A APLICAÇÃO
Ao utilizar a lâmpada com uma Z1
ZigBee Bridge ou ICS-2000, obtenha
a aplicação lendo o código QR ou
vá a trust.com/zigbee. Ao utilizar a
lâmpada com o comando remoto,
siga os passos indicados no manual
deste.
3. SIGA AS INSTRUÇÕES DA
APLICAÇÃO
Abra a aplicação e siga as instruções
para ligar a lâmpada. A lâmpada
pisca 2 vezes para confirmar que a
ligação foi bem-sucedida. Nota: as
lâmpadas e focos RGB ZigBee ficam
verdes durante 10 segundos para
confirmar a ligação.
PONHA A LÂMPADA EM MODO
DE LIGAÇÃO PARA UMA BRIDGE
ZIGBEE (COMO A Z1/ICS-2000)
Pode pôr a lâmpada em modo de
ligação (repor) LIGANDO e DESLI-
GANDO a lâmpada 5 vezes com o
interruptor tradicional ou enroscan-
do e desenroscando a lâmpada do
casquilho 5 vezes. A lâmpada pisca
4 vezes para confirmar o modo de
ligação (repor). O modo de ligação
dura 20 segundos.
O alcance sem fios aumenta ao
acrescentar mais produtos ZigBee
(rede em malha). Para mais infor-
mações sobre redes em malha, vá a
www.trust.com/zigbee
PT SMART LED LIGHTS
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust 71145 Zigbee Starterset Z1 SMART LED LIGHTS - 71176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust 71145 Zigbee Starterset Z1 SMART LED LIGHTS - 71176 in the language / languages: All languages as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info