681451

Trust 71113 - ALMST-2000 Magnetic Contact Sensor Manual

8
Zoom out
Zoom in
Previous page
1/54
Next page
ALMST-2000 WIRELESS MAGNETIC SENSOR
2
7. Close the ALMST
Place both parts of the magnetic sensor back on the mounted backplates. Again make sure both
points on the two parts are in line with each other.
8. Operation of the ALMST
ON-signal: Once the two parts are separated more than 5mm from each other, the sensor sends an
ON-signal to the Siren.
Note: After arming the ALSIR-2000 there is a 85 sec walk-out time. 4 sec after arming the alarm
windows and doors can be opened for max 1 min. After 85 sec the sensor is active. Tip: Arm the Siren
from the outside.
9. Unpair the ALMST
Consult the manual of the Siren to activate the learn mode. Send (while the learn mode of the Siren
is active) a disconnect-signal by pressing the DEL button with a sharp object next to the battery slot
of the magnetic sensor. The LED indicator will flash 5x to confirm that the unpairing has been done
successfully.
Note: When the sensor is not used unpair it from the Siren first before removing it.
10. Delete ALMST memory
To delete the memory of the ALMST press the DEL button for 2 seconds with a sharp object (untill the
LED starts to blink). Release the button and press the DEL button again for 3 seconds. (untill the LED
starts to blink fast). Press the DEL button shortly to delete the memory of the ALMDT. The LED will
blink 5x to confirm the memory has been deleted.
EN
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust 71113 - ALMST-2000 Magnetic Contact Sensor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust 71113 - ALMST-2000 Magnetic Contact Sensor in the language / languages: All languages as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info