629588
9
Zoom out
Zoom in
Previous page
1/44
Next page
9
Operation instructions
Taking into operation
Open gas remote switch if
present.
1. Open extraction valve.
2. Press gas flow monitor reset
button (green button) on gas
pressure regulator slowly.
3. Release gas flow monitor
reset button (green button) on
gas pressure regulator slowly
(3 seconds).
2.
3.
3 sec
1.
If no pressure point can be felt
when the button is pressed
again, the regulator is ready for
operation (repeat procedure if
necessary).
Start the gas-burning devices if
desired.
The SecuMotion may switch off
if it is not going to be used for
a long period and the extraction
valve is closed.
Checking for leaks in the
high pressure area
A trained technician must
check the low pressure
area for leaks. We also recom-
mend that the operator of the
gas system should check the
high-pressure area for leaks
(screw connections at extraction
valve / regulator inlet) at regular
intervals.
Using a leak spray, for ex-
ample, in accordance with
DIN EN 14291.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma SecuMotion Gastank at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma SecuMotion Gastank in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info