484673
12
Zoom out
Zoom in
Previous page
1/76
Next page
12
Mover H SE / H TE
Safety instructions
Practice operating the Mover in an open area before using
for the first time. This to fully familiarise yourself with
the handset / mover operation.
Always check tyres and drive rollers before using the equip-
ment; remove sharp-edged stones and the like if necessary.
No person must be present in the caravan during operation.
All persons (particularly children) must remain outside
the Mover operating area.
When operating the mover, ensure that no hairs, fingers or
other body parts, clothing or any other objects carried on
the body can become trapped by moving or rotating parts
(e.g. drive rollers).
The distance between the radio remote hand set and the
centre of the caravan when manoeuvring must not
exceed 10 m!
In the event of malfunctions pull on the handbrake.
To prevent the caravan from tipping, direct the tow hitch
downhill when manoeuvering down a slope. This ensures
that the wheels, in particular those driven by the Mover
H TE, retain their road grip.
– After manoeuvring, always apply the handbrake first,
swivel the drive rollers away from the tyres and block
the wheels (particularly on downwards-sloping surfaces).
The Mover is not suitable for use as a parking brake for
a parked caravan.
Ensure that remote radio control is protected from unau-
thorised access (particularly by children!).
Never tow the caravan with the drive rollers applied. This
can cause damage to the tyres, the towing vehicle and the
drive units.
All wheels and tyres on the caravan must be of the same
size and design.
To ensure that the Mover functions correctly, the clear-
ance between the tyres and the swivelled driving rollers
is 10 – 26 mm (for loaded vehicles and loaded wheels).
All tyres must have the same inflation pressure as per the
manufacturer’s instructions (check at regular intervals!).
10 – 26 mm
min. 110 mm
Driving direction
– Do not use the Mover as a support when jacking up the
caravan, since this can damage the drive unit.
Sensitive objects such as cameras, DVD-Players etc. must
not be kept in the stowage box near the control unit or the
motor cable. They can be damaged by the electromagnetic
fields.
The empty weight of the vehicle increases by the weight of
the Movers, which reduces the payload of the vehicle.
General instructions
Remove plug from safety socket after manoeuvring, otherwise
the battery will be discharged. Standby current with plug
inserted approx. 200 mA. Standby current with plug removed
< 1 mA.
The Mover H H SE was developed for overcoming inclines of
up to approx. 25 % with a gross weight of 1200 kg and 15 %
with a gross weight of 1800 kg,
and the Mover H TE for overcoming inclines of up to approx.
25 % with a gross weight of 1200 kg and 10 % with a gross
weight of 2250 kg on a suitable surface.
Depending on the weight of the caravan, the Mover cannot
overcome obstructions that are more than about 2.0 cm in
height without assistance (please use wedges as a ramp).
Due to the nature of a radio signal, it can get corrupted by ex-
ternal terrain or objects. So there may be small areas around
the caravan where the quality of reception reduces, hence the
Mover may stop momentarily.
When the Mover is switched off using the remote control
the control unit remains in standby. In order to switch off
completely the battery must be disconnected or an isolating
switch installed.
Batteries
We recommend the use of so-called drive and lighting batteries.
Gel batteries and round cell batteries are also suitable.
These batteries are designed for high power demands and
have an extremely long service life. The maximum power
consumption of the Mover on the steepest incline and carry-
ing the maximum weight is 120 A. The correct choice of bat-
tery depends on the usage period and the scope of use (other
consumers in caravan). For mover operation we recommend
batteries with a capacity of approx. 60 Ah or more.
Example:
A fully charged lead-acid battery with a capacity of 60 Ah al-
lows the Mover to be operated for approximately 30 minutes
with a full load (depending on weight of caravan, battery type
and terrain). On level terrain the Mover has average power
consumption of approximately 20 A and therefore an operat-
ing time of approx. 3 hours.
The use of gel batteries or round cell batteries means that
smaller batteries can be used.
Batteries with more capacity allow the equipment to be used
for longer.
We recommend the use of chargers with the IuoU character-
istic curve (e.g. Truma battery charger NT 12/ 3-18, part no.
39901-01). These chargers prevent the battery from being
damaged because of overcharging, for example.
Because of the limited charging current, the charger
cannot be used for rapid charging.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma Mover Mover H SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover Mover H SE in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 7,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info