629584

Truma DuoControl CS Manual

15
Zoom out
Zoom in
Previous page
1/76
Next page
15
Removal status
In the normal position (operating cylinder on the left, reserve
cylinder on the right), the following display will be seen:
– Status display (b) is green = gas taken from the left cylinder
(operating cylinder).
– Status display (b) is red = gas is taken from the right cylin‑
der (reserve cylinder); check connection and fill level of left
cylinder.
Changing the LPG cylinder
Please use the included screw aid to attach and remove the
high pressure hoses. It will help you generate the necessary
tightening torque and will prevent damage to the screw fit‑
tings, which may otherwise result from using an improper tool.
Residual gas: No smoking, no naked flames!
– The DuoControl CS offers you the possibility of replacing
an empty gas cylinder without interrupting the operation
of consumers. Non‑return valves integrated into the inlet
connections prevent gas from escaping when only one gas
cylinder is attached for a short time (“Using only one gas
cylinder”).
– Rotate the control knob (a) by 180° or half a turn to the stop
position, and the previous reserve cylinder becomes the
operating cylinder. After the cylinder change the full gas cyl‑
inder is available again as the reserve cylinder.
The status display (b) changes to green.
– Close the valve of the empty gas cylinder.
– Remove the high pressure hose from the gas cylinder and
remove the slip‑on adapter, if present.
– Attach the high pressure hose to the full gas cylinder and fit
the slip‑on adapter, if present.
– Open the full gas cylinder’s valve.
– Firmly press the hose rupture protection (d – green button)
and, if necessary, the green reset button (c) for about 5 sec‑
onds in each case.
The status display (b) remains on green.
After making the connection, briefly turn back the control
knob (a) to the full gas cylinder to bleed the system (with the
consumer operating).
After any intervention, check the hose connection to the
cylinder valve for leaks (see “Checking for leaks in the
high‑pressure section”).
Hose change
Please use the included screw aid to attach and remove the
high pressure hoses. It will help you generate the necessary
tightening torque and will prevent damage to the screw fit‑
tings, which may otherwise result from using an improper tool.
Residual gas: No smoking, no naked flames!
– Close the gas cylinder valve.
– Unscrew the high‑pressure hose from gas cylinder (or the
slip‑on adapter) and from the DuoControl CS inlet.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma DuoControl CS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma DuoControl CS in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info