565798
22
Zoom out
Zoom in
Previous page
1/72
Next page
22
Initial start-up
In order to perform the initial start-up, the following steps are
required:
Make sure that all equipment is connected to the power supply
12 V DC voltage or
230 V Mains voltage with air conditioning systems and
Combi E.
Start the search of the devices under menu item
“Service menu” -> “RESET” -> “PR SET”.
After pressing, the control panel initialises itself. “INIT ..” appears
on the display while this is in progress. The devices that have
been found have therefore been stored in the control panel.
Start-up
Start / standby screen
After connecting the control panel to the mains power supply,
a start screen is displayed after a few seconds.
If no entry is made for several seconds, the standby screen is
automatically displayed.
If the time has been set (see “Set time”), the display
alternates between the time and the room temperature
setting.
After a repair / retrofitting, the procedure described
under “Initial start-up” must be repeated.
Functions
The functions in the menu bars (3, 4) of the control panel are
selectable in any order. The operating parameters are shown
on the status bar (2) and on the displays (5, 6).
Switch control panel on/off
Press rotary push button for longer than 3 seconds.
Previously set values / operating parameters are reac-
tivated after switching on.
The control panel deactivation procedure can be
delayed by several minutes because of internal heat-
ing system after-runs.
Select setting level
Tap rotary push button.
The display shows the setting level. The first icon flashes.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma CP plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma CP plus in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Truma CP plus

Truma CP plus Usermanual and installation guide - Dutch, Danish, Swedish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info