756393
15
Zoom out
Zoom in
Previous page
1/33
Next page
EN 15
thermal imaging camera XC300 / XC600
To transmit fully radiometric real-time IR videos to your PC
using a USBtypeC data cable (only possible in combination
with the optionally available IC report PRO software), please
proceed as follows:
1. Connect the optionally available dongle of the IC report
analysis software PRO version to a free USB port of your
PC. Without the dongle, the extension of the USB interface
in the analysis software is locked.
2. Open the IC report software and activate the Trans.
transmission mode at the camera.
3. Connect the PC to the camera using the supplied USB
cable.
4. If the IC report analysis software was properly installed
beforehand, the PC's operating system will automatically
identify the connected camera and install all necessary
drivers.
5. After the drivers have been successfully installed, the
camera will be detected as mass storage device every
time it is connected to the PC.
6. In the menu of the analysis software select the item
Monitoring – Connect USB or click directly onto the USB
symbol.
7. Select the type of camera you want to connect to your
computer in the submenu that opens.
8. Now enter the path of the location where the calibration
table (dataload.bin file) is to be saved on your computer.
9. Select the applicable temperature range.
10. Confirm with OK.
ðThe live image of the camera appears in the software's
analysis window.
Info
The calibration table that corresponds to the camera is
bound to the serial number and only valid for the
respective device connected.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec XC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec XC300 in the language / languages: English as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec XC300

Trotec XC300 User Manual - German - 33 pages

Trotec XC300 User Manual - Dutch - 32 pages

Trotec XC300 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info