756393
12
Zoom out
Zoom in
Previous page
1/33
Next page
12 EN
thermal imaging camera XC300 / XC600
4. Wait a moment until the device has started up completely.
ðA current IR image and the start screen appear on the
display:
Setting the language
Please proceed as follows to set the language for the menu
texts:
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display(1).
2. Select the Settings menu.
3. Select the System menu.
4. Press the Language button.
5. Swipe your finger through the list of available languages.
6. Swipe to select the desired language.
7. Confirm the selection by pressing the OK button.
8. Wait a moment.
ðThe desired language has been selected and set.
Setting date and time
Please proceed as follows to set the date and time for the
system and the time stamp on the images/ videos:
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display(1).
2. Select the Settings menu.
3. Select the System menu.
4. Press the Date & Time button.
5. Swipe to select the desired date.
6. Confirm your selection with OK.
7. Press the Set time button.
8. Swipe to select the desired time.
9. Confirm your selection with OK.
10. Press the Set timezone button.
11. Swipe to select the desired timezone.
12. Confirm your selection with OK.
ðDate and time have been selected and set.
Calibrating and focussing the IR camera
Info
You can also assign this function to the multifunction
button(5). Further information on the multifunction
button is provided in the chapter Configuring the
multifunction button.
During a calibration, the camera performs an automatic
adjustment(calibration) to the temperatures in the image
section. An image that is not sharply focussed leads to
deviations in the temperature measurement!
Proceed as follows to perform an automatic
adjustment(calibration), and to automatically focus the
IRcamera on an object to be thermographed:
1. Point the device at the object to be thermographed with
the IRlens(10) open.
2. Press the Shutter button(19).
ðThe internal shutter of the IR camera closes briefly and
an automatic adjustment (calibration) to the
temperatures in the image section is performed.
35.6
28.4
ºC Emiss: 0.95 Dist: 1.5 14:23
3. Press the Fbutton(21) if it is not already illuminated in
blue.
ðThe colour of the Fbutton changes from green to blue.
ðThe focus function is activated.
4. Tap the object you want to focus on the display.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec XC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec XC300 in the language / languages: English as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec XC300

Trotec XC300 User Manual - German - 33 pages

Trotec XC300 User Manual - Dutch - 32 pages

Trotec XC300 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info