756409
13
Zoom out
Zoom in
Previous page
1/17
Next page
EN 13
vaccum cleaner VC 150 E / VC 155 E
4. Remove the coarse dirt from all components and rinse the
collection container(15) and the parts of the cyclone
unit(27) with cold water. Allow all parts to air-dry. Make
absolutely sure that the HEPA filter(28) does not get wet. It
must only be cleaned in a dry condition.
Before start-up, the cyclone unit(27) must be re-assembled and
inserted into the collection container(15). To do so, please
proceed as follows:
1. Re-assemble the cyclone unit(27) by joining the two parts
together again and turning the lower part of the cyclone
unit in the "LOCK" direction.
2. Insert the HEPA filter(28) into the dry cyclone unit(27).
3. Insert the cyclone unit into the collection container(15).
4. Re-attach the collection container(15) to the device by
inserting the connecting lug(29) of the collection
container(15) into the housing recess first and then let the
collection container(15) engage in its position.
29
Cleaning the air outlet filters
Check the two air outlet filters regularly(7) and remove coarse
dirt and dirt deposits from them.
üThe device is switched off.
1. Dismount the covers(30) from both sides of the two air
outlet filters(7) by turning them in counter-clockwise
direction and removing them.
30
30
2. Remove the air outlet filters(7) from the covers.
30
7
3. Remove coarse dust and dirt deposits and rinse the air
outlet filters(7) with clear water. Observe that the air outlet
filters must dry for 24 hours afterwards.
4. Re-insert the clean and dry air outlet filters(7) into the two
covers.
5. Mount the covers(30) of the two air outlet filters by
inserting them into the motor housing(6) and turning them
in clockwise direction until they engage audibly.
Check the two air outlet filters regularly(7) and remove coarse
dirt and dirt deposits from them.
Cleaning the electrical floor nozzle
To make it easier to clean the floor nozzle, the brush roller(33)
of the electrical floor nozzle(10) can be removed. To do so,
please proceed as follows:
üThe floor nozzle is not mounted on the vacuum cleaner.
1. On the bottom side of the electrical floor nozzle(10) open
the latch(31) by slightly pressing on the tongue of the
latch(32).
2. Open the latch(31) and remove it.
31
32
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec VC 150 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec VC 150 E in the language / languages: English as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec VC 150 E

Trotec VC 150 E User Manual - German - 17 pages

Trotec VC 150 E User Manual - Dutch - 17 pages

Trotec VC 150 E User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info