688846
7
Zoom out
Zoom in
Previous page
1/10
Next page
EN 7
tower fan TVE 36 T
Night mode
In night mode, the device gradually changes the fan stage
automatically depending on the selected fan stage. You can set
the fan stage manually from 1 to 3 in this mode.
When set to fan stage1 in night mode, the device keeps
running at the first stage of natural wind mode.
When set to fan stage2 in night mode, the device keeps
running at the second stage of natural wind mode. After
30minutes the device automatically switches over to the
first stage of natural wind mode.
When set to fan stage3, the device keeps running at the
third stage of natural wind mode. After 30minutes the
device automatically switches over to the second stage of
natural wind mode. After another 30minutes the device
automatically switches over to the first stage of natural
wind mode.
To activate night mode, please proceed as follows:
1. Press the MODE button(15) until the = night mode LED
lights up among the operating mode LEDs(13).
ð The device runs in night mode.
2. Press the fan stage button(14) to switch between the fan
stages.
ð The selected fan stage is indicated by the fan stage
indication(11).
Setting the timer
The timer has two modes of operation:
automatic switch-off upon expiry of a preset number of
hours
automatic switch-on upon expiry of a preset number of
hours
The number of hours can be set to 1h, 2h, 3h, 4h, 5h, 6h or
7h
The function can be set in all operating modes. It can be
activated both during operation and in standby mode.
Automatic switch-on
ü The device is switched off.
1. Press the TIMER button(9) until the desired number of
hours is displayed by the Hours LEDs(12).
ð The timer setting equals the desired number of hours.
ð The device switches on automatically after the set
number of hours has elapsed.
2. To delete the setting, press the TIMER button(9)
repeatedly until the Hours LEDs(12) no longer indicate any
value.
Automatic switch-off
ü The device is switched on.
1. Press the TIMER button(9) until the desired number of
hours is displayed by the Hours LEDs(12).
ð The timer setting equals the desired number of hours.
ð The device switches off automatically after the set
number of hours has elapsed.
2. To delete the setting, press the TIMER button(9)
repeatedly until the Hours LEDs(12) no longer indicate any
value.
Memory function
If you switch the device back on from standby mode or after a
power failure, the settings selected for the last used operating
mode are saved.
Any activated timer will not be saved in the device.
Using the oscillation function
By means of the oscillation function you can achieve consistent
ventilation.
ü The device is switched on and operating.
1. Press the OSCbutton(8) to activate the oscillation
function.
ð The oscillation function is activated.
ð The fan body rotates to and fro by up to 60°.
2. Press the OSCbutton(8) to deactivate the oscillation
function.
ð The oscillation function is deactivated.
ð The device stops oscillation at the desired position and
continues to run in the selected operating mode.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TVE36T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TVE36T in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TVE36T

Trotec TVE36T User Manual - German - 11 pages

Trotec TVE36T User Manual - Dutch - 10 pages

Trotec TVE36T User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info