753268
9
Zoom out
Zoom in
Previous page
1/23
Next page
EN 9
dehumidifier TTK 96 E / TTK 127 E
No. Designation Meaning
20 Segment display Indication of the current relative room
humidity level
Indication of the relative room humidity
level during set-up
Indication of the number of hours during
timer programming
Indication of error codes
21 POWER button Power button:
For switching the device on or off
22 Selection button = Decrease value
= Increase value
For the humidity level:
35 to 85% in increments of 5%
For the timer function:
0 to 10h in increments of 0.5h
10 to 24h in increments of 1h
23 TIMER button Switches the timer function on or off.
24 TURBO button Sets the fan speed:
Stage1= normal
Stage2= high (laundry drying function)
25 CONT. button Switches continuous operation on or off.
26 FILTER button Resets the cleaning cycle for the filter.
27 COMFORT button Switches comfort mode on or off.
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the POWER button(21).
ðThe device starts to dehumidify.
Setting the operating mode
Dehumidification
Continuous operation
Comfort mode
Laundry drying function
Dehumidification
The device keeps running until reaching the desired relative
room humidity. Then the compressor switches off, but the fan
keeps running. Once the desired relative room humidity is
exceeded, the compressor switches back on.
In this operating mode, the desired relative room humidity can
be set at any time in increments of 5% within a setting range of
35% to 85%.
Setting the desired relative room humidity
The desired relative room humidity can be preselected at any
time.
1. Press the left or right-hand side of the selection button(22)
to adjust the relative room humidity level.
ðThe value for desired room humidity is indicated on the
segment display(20) for approx.5s.
ðThen the currently measured humidity level reappears
on the display.
ðThe device switches off automatically upon reaching the
desired value for the relative room humidity.
Setting the fan speed
Using this function you can choose between a low and a high
fan speed. The fan speed can only be adjusted in
dehumidification mode. The default setting for the laundry
drying function is the highest level.
1. Press the TURBO button(24) to switch between the normal
and high fan speed.
ðThe TURBO LED(16) is illuminated when the fan runs at
high speed.
Continuous operation
The device dehumidifies the air constantly and regardless of the
current humidity level.
Please proceed as follows to enable continuous operation:
1. Press the CONT. button(25) to switch continuous operation
on or off.
ðWith activated continuous operation mode the
CONT. LED(15) is illuminated.
Info
For continuous operation the condensation drain hose
can be connected in order to continuously drain the
accumulating condensate.
Comfort mode
Comfort mode ensures an agreeable humidity level ranging
between 45% and 55%. Depending on the room temperature
the device automatically regulates the convenient humidity level
choosing a value from 45%- 50%- 55%.
In this operating mode it is not possible to regulate the humidity
level manually.
1. Press the COMFORT button(27) to switch comfort mode on
or off.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TTK96E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TTK96E in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TTK96E

Trotec TTK96E User Manual - German - 24 pages

Trotec TTK96E User Manual - Dutch - 24 pages

Trotec TTK96E User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info