753266
8
Zoom out
Zoom in
Previous page
1/19
Next page
8 EN
dehumidifier TTK 90 E
No. Designation Meaning
20 Timer button Switches the timer function on or off.
For setting the number of hours for
the timer (1 to 24h)
21 Fan/ Drybutton For setting a low or high fan speed
(function for drying laundry)
22 On/ Off button For switching the device on or off
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the On/ Off button(22).
ðThe device starts in dehumidification mode.
Setting the operating mode
Dehumidification
Laundry drying function
Dehumidification
The device keeps running until reaching the desired relative
room humidity. Once the desired relative room humidity is
exceeded, the compressor switches back on.
The desired relative room humidity can be set within a setting
range from 30% to 90% in steps increments of 5% at any
time.
Setting the desired relative room humidity
Setting is possible in the range between 30% and 90% in
increments of 5%.
1. Press the arrow buttons(15, 16) to adjust the relative room
humidity.
ðThe desired relative room humidity will be indicated on the
humidity level segment display(18).
Setting the fan speed
Using this function you can choose between a low and a high
fan speed (function for drying laundry).
1. Press the Fan/ Dry button(21) to select either high or low
fan speed.
ðThe LED for high(12) or low(13) fan speed lights up
depending on the selected setting.
Setting the timer
For the device to switch on or off automatically after a
predefined number of hours (1 to 24h), you can programme the
timer.
The timer can be programmed in increments of 1hour.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
üThe device is switched off.
1. Press the Timer button(20) to activate the timer.
ðThe timer LED(14) is illuminated.
ðThe number of hours is shown on the segment
display(19).
2. Press the arrow buttons(15, 16) to set the number of
hours.
ðThe number of hours flashes on the segment
display(19).
3. Wait for approx. 5seconds in order to save the setting.
ðAfter the predefined time, the device switches itself on.
ðThe set operating time will be indicated for a few seconds
on the segment display(19). Afterwards, the current
temperature is displayed again.
Note regarding automatic switch-on:
Pressing the On/ Off button(22) deactivates the automatic
switch-on function.
Automatic switch-off
üThe device is switched on.
1. Press the Timer button(20) to activate the timer.
ðThe timer LED(14) is illuminated.
ðThe number of hours is shown on the segment
display(19).
2. Press the arrow buttons(15, 16) to set the number of
hours.
ðThe number of hours flashes on the segment
display(19).
ðAfter the predefined time, the device switches itself off.
ðThe set operating time will be indicated for a few seconds
on the segment display(19). Afterwards, the current
temperature is displayed again.
Note regarding automatic switch-off:
Pressing the On/ Off button(22) deactivates the automatic
switch-off function.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TTK90E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TTK90E in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TTK90E

Trotec TTK90E User Manual - German - 18 pages

Trotec TTK90E User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info