727855
9
Zoom out
Zoom in
Previous page
1/14
Next page
EN 9
oil-filled radiator TRH 25 E / TRH 26 E
No. Designation Meaning
9 Power symbol Is permanently illuminated if the on/off
switch(6) is set to
position"I" (standby operation)
10 Increase value
button
Set the desired room temperature
(15°C to 35°C)
11 Decrease value
button
12 Power button Switch the device on and off
13 Timer button Automatic switch-on timer function in
increments of 1hour (1h to 12h)
Automatic switch-off timer function in
increments of 1hour (1h to 12h)
Set number of hours (1h to 12h) for
the timer function
14 Mode button
Select heating level I, II or III
15 High heating
levelIII symbol
Is illuminated if the high heating level
is activated (2500W)
16 Medium heating
levelII symbol
Is illuminated if the medium heating
level is activated (1500W)
17 Low heating
levell symbol
Is illuminated if the low heating level is
activated (1000W)
18 Segment display Indication of the desired room
temperature (when switching on the
device, the temperature is preset to
25°C)
Indication of the number of hours
during timer programming
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Set the on/off switch(6) toI.
ð The Power(9) symbol is illuminated.
ð An acoustic signal is emitted.
ð The device is now in standby mode.
2. Press the power button(12).
ð The preset room temperature of 25°C is indicated on
the segment display(18).
ð The device starts in heating level III.
ð The high heating level lIIsymbol(15) is illuminated.
ð The Powersymbol(9) is illuminated.
ð The Temperaturesymbol(7) is illuminated.
Info
The device will not be switched on until the room
temperature falls below the temperature set at the
room thermostat.
In standby mode, the device memorizes the room
temperature setting.
Setting the heating level
You can select the following heating levels:
Low heating level (heating capacity 1000W)
Medium heating level (heating capacity 1500W)
High heating level (heating capacity 2500W)
1. Press the modebutton(14) to select the desired operating
mode.
ð An acoustic signal is emitted.
ð The corresponding symbol(15,16,17) is illuminated.
Setting the desired room temperature
You can set the desired room temperature at any time during
operation.
1. Repeatedly press the increase value(10) or decrease
valuebutton(11) until the desired room temperature is
shown on the segment display(18).
ð An acoustic signal is emitted.
ð The desired room temperature is displayed.
Info
The desired room temperature should be higher than
the current room temperature.
Setting the timer
The timer has the following modes of operation:
Automatic switch-on upon expiry of a preset number of
hours
Automatic switch-off upon expiry of a preset number of
hours
The number of hours can be between1 and12 and can be
adjusted in increments of 1hour.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is in standby mode.
1. Press the timer button(13).
ð The timersymbol(8) is illuminated.
ð The Powericon(9) is illuminated.
ð The number of hours 00 blinks on the segment
display(18).
2. Repeatedly press the Timerbutton(13) to select the
desired number of hours.
ð The desired number of hours blinks on the segment
display(18) for approx. 7s.
ð The Timericon(8) is illuminated.
ð The Powericon(9) is illuminated.
ð The desired number of hours is shown on the segment
display(18).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TRH26E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TRH26E in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TRH26E

Trotec TRH26E User Manual - German - 14 pages

Trotec TRH26E User Manual - Dutch - 14 pages

Trotec TRH26E User Manual - French - 15 pages

Trotec TRH26E User Manual - Italian - 14 pages

Trotec TRH26E User Manual - Polish - 14 pages

Trotec TRH26E User Manual - Turkish - 14 pages

Trotec TRH26E User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info