756430
11
Zoom out
Zoom in
Previous page
1/19
Next page
EN 11
garden pump TGP 1025 E / TGP 1025 ES / TGP 1025 ES ES
Errors and faults
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
Warning
The device is pressurized. Before opening the screw
plug at the water filler neck(3) or water drain
nozzle(5), the pressure must be released from the
pressure line via the lowest-level consumer.
Switch off the device.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damages.
Check the on-site fusing.
Check the current pressure on the pressure gauge(9). Only
when the pressure is below the switch-on pressure of
1.5bar will the device switch on and operate until reaching
the switch-off pressure of 3bar.
The device might have overheated and the thermal
protection circuit is activated.
If so, wait for approx. 10minutes before restarting the
device. If the device is not starting, have the electrics
checked by a specialist company or by Trotec.
The water temperature is above 35°C and the thermal
protection circuit is activated.
The device is running, but not sucking in any water:
Check whether the suction line is submerged in the
pumping medium and/or check whether the water level of
the pumping medium is sufficient.
Check whether the screw plugs at the water filler neck(3)
and water drain nozzle(5) are completely closed and
whether the seal is installed correctly.
Check the inside of the device for any remaining air. Open
the screw plug at the water filler neck(3) and fill the
device with water all the way to the edge.
Check the suction line and the connection for tightness.
Check whether the suction height is too high, and reduce it
if necessary.
Check whether the hose line is kinked or blocked. Remove
kinks and/ or blockages.
Insufficient or decreasing conveying capacity:
Check whether the suction height or pump height exceeds
the max. specifications indicated in the technical data, and
reduce it if necessary.
Check whether the hose line is kinked or blocked. Remove
kinks and/ or blockages.
Check whether the suction line is clogged at the intake
opening. Remove any dirt.
Inspect both the pressure and suction line for leaks, and
replace them if necessary.
The pump switches on and off too often:
Check whether the precharge pressure in the pressure
tank is set correctly; it should be 1.5 to 1.8bar. Please
refer to the chapter Checking the precharge pressure in
the pressure tank.
If the pressure tank cannot maintain the set precharge
pressure, the membrane inside the pressure tank is
damaged and must be replaced. If so, contact a specialist
company or Trotec.
Check whether the check valve at the suction line is
blocked or damaged. Remove the obstruction or replace
the check valve.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch the device off.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Notes on maintenance
Inside the device, there are no parts that need to be maintained
or lubricated by the user.
Note
If there is a danger of frost, drain all water from the
device via the water drain nozzle(5) to prevent the
device from being damaged. Before restart, the device
must be filled with water again.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TGP1025ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TGP1025ES in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TGP1025ES

Trotec TGP1025ES User Manual - German - 20 pages

Trotec TGP1025ES User Manual - Dutch - 20 pages

Trotec TGP1025ES User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info