727183
7
Zoom out
Zoom in
Previous page
1/11
Next page
EN 7
fan heater TFC 1 E / TFC 2 E
Please proceed as follows to manually set the temperature at
which the device will be activated/deactivated automatically:
1. Switch the device on.
2. Press the Reduce temperature button(8) to reduce the
temperature set at the device.
3. Press the Increase temperature button(12) to increase the
temperature set at the device.
ð The segment display(11) indicates the set temperature.
Setting the fan speed
1. Simultaneously press the Reduce temperature button(8)
and the Increase temperature button(12) to increase or
slow down the fan speed.
ð The segment display(11) indicates the following for a
moment:
ð LL = low, HH = high
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours
automatic switch-off upon expiry of a preset number of
hours
The number of hours can range from 1 to 12 and can be
adjusted in increments of 1h.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
If you set the timer while the fan heater is in operation, you will
set the number of hours after which the fan heater will switch
off. If you set the timer while the fan heater is in standby mode,
you will set the number of hours after which the fan heater will
switch on.
Please proceed as follows to set the timer:
1. Press the timer button(9).
ð The segment display(11) will change over from degrees
to hours for a moment.
2. Now press the timer button(9) again to set the desired
number of hours.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch the device off by setting the main switch to 0.
Unplug the device from the mains socket.
Allow the device to cool down completely.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Errors and faults
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
Check the power connection.
Check the mains plug for damages.
Check the on-site fusing.
The motor might be defective. Have a defective motor
replaced by a specialist electrical company.
Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
The device is switched on, the fan is operating, the heating
is not:
Check whether a heating level is selected.
Check whether the overheating protection has tripped, see
chapter Safety.
The heating resistor might have blown. Have a defective
heating resistor replaced by a specialist electrical
company.
The air current is reduced:
Check the air inlet and outlet. Make sure that air inlet and
outlet are not obstructed. Remove any dirt. Observe the
minimum distance from walls or other objects according to
the technical data.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TFC2E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TFC2E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TFC2E

Trotec TFC2E User Manual - German - 12 pages

Trotec TFC2E User Manual - Dutch - 12 pages

Trotec TFC2E User Manual - French - 11 pages

Trotec TFC2E User Manual - Italian - 11 pages

Trotec TFC2E User Manual - Polish - 12 pages

Trotec TFC2E User Manual - Turkish - 12 pages

Trotec TFC2E User Manual - Spanish - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info