727463
8
Zoom out
Zoom in
Previous page
1/14
Next page
8 EN
fan heater TFC 220 E
Setting the operating mode
The device comes with the following operating modes:
Comfort mode
Night mode
Eco mode
Frost monitor function
Please proceed as follows to activate the desired operating
mode:
ü The device is switched on.
1. Press the power button(19).
ð The display shines brightly and the control panel is
activated.
2. Repeatedly press the mode button(18) until the icon for
the desired operating mode(9, 10, 11 or 12) is displayed.
ð The device starts in the desired operating mode.
Comfort mode
The device automatically operates at the high heating level until
the determined room temperature exceeds the desired room
temperature by 2°C. Then the heating switches off.
The heating indication(20) is no longer displayed.
The comfort modeindication(9) continues to be displayed.
If the determined room temperature falls below the desired
room temperature by 2°C, the heating switches back to
operation at the high heating level.
Night mode
The device automatically operates at the low heating level until
the determined room temperature exceeds the desired room
temperature by 2°C. Then the heating switches off.
The heating indication(20) is no longer displayed.
The night modeindication(10) continues to be displayed.
If the determined room temperature falls below the desired
room temperature by 2°C, the heating switches back to
operation at the low heating level.
Eco mode
The device automatically operates at the high heating level
when the room temperature is below 16°C.
The device automatically operates at the low heating level when
the room temperature is above 18°C.
The device switches off automatically when the room
temperature is above 21°C. This temperature cannot be
changed.
Frost monitor function
This function is only available in standby mode. The devices
heats automatically when the room temperature is below 5°C
and switches off when the temperature exceeds 7°C. These
temperatures cannot be changed.
Setting the desired room temperature
The determined room temperature is displayed in the
temperature indication(23). You can adjust the desired room
temperature in comfort mode and in night mode.
1. Press the temperaturebutton(14).
ð The temperature indication(23) flashes.
ð The desired room temperature is displayed.
2. Press the arrow buttons increase value(16) or decrease
value(17) to adjust the desired room temperature. Setting
is possible in the range between 15°C and 35°C in
increments of 1°C.
ð The desired room temperature is saved and displayed in
the temperature indication(23) for approx.5seconds.
Then the current room temperature is displayed again.
Info
The desired room temperature should be higher than
the current room temperature.
Setting the timer
The timer has the following modes of operation:
automatic switch-on upon expiry of a preset number of
hours and minutes
automatic switch-off upon expiry of a preset number of
hours and minutes
The setting range for the timer spans from 1minute to 24hours
and can be adjusted in increments of 1minute.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is set to the frost monitor function.
1. Press the timer button(15).
2. Select the desired number of hours and minutes by use of
the increase value(16) or decrease value(17) arrow
button. The value range is between 1minute and24hours.
ð The number of hours and minutes flashes on the hours/
minutes indication(22).
3. Press the timer button(15).
ð The desired time until automatic switch-on is saved.
ð The timerindication(8) is displayed.
ð The time left until switch-on is displayed in the hours/
minutes indication(22) and counted down.
ð Once the set time has elapsed, the device will switch
over into comfort mode.
Notes regarding automatic switch-on:
Manually switching the device on disables the automatic
switch-on function.
If you select 0hours/ minutes, the timer will be off.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TFC220E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TFC220E in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TFC220E

Trotec TFC220E User Manual - German - 14 pages

Trotec TFC220E User Manual - Dutch - 14 pages

Trotec TFC220E User Manual - Danish - 14 pages

Trotec TFC220E User Manual - French - 15 pages

Trotec TFC220E User Manual - Italian - 14 pages

Trotec TFC220E User Manual - Polish - 14 pages

Trotec TFC220E User Manual - Portuguese - 14 pages

Trotec TFC220E User Manual - Swedish - 14 pages

Trotec TFC220E User Manual - Turkish - 15 pages

Trotec TFC220E User Manual - Spanish - 14 pages

Trotec TFC220E User Manual - Norwegian - 14 pages

Trotec TFC220E User Manual - Finnish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info